Evangelia Tarani

Dr. Evangelia Tarani

Laboratory of Advanced Materials & Devices, Department of Physics, Aristotle University of Thessalo-niki, GR 54 124, Thessaloniki, Greece
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 January 2023 in Journal of Materials Science
Verified
Journal Article
Open access
PDF file
Evangelia TaraniEvangelia Tarani
Evangelia Tarani
IAIoannis Arvanitidis
Ioannis Arvanitidis
DCDimitrios Christofilos
Dimitrios Christofilos
DBDimitrios N. Bikiaris
Dimitrios N. Bikiaris
KCKonstantinos Chrissafis
Konstantinos Chrissafis
GVGeorge Vourlias
George Vourlias
This work is a comparative study of four different techniques to determine the crystallinity of high-density polyethylene (HDPE) nanocomposites filled with different diameter sizes (5, 15 and 25 μm) of graphene nanoplatelets (GNPs) at various amounts (0.5–5 wt%). The structure of HDPE/GNPs nanocomposites was extensively studied by using different experimental methods, such as X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. To further provide a complete comparison, differential scanning calorimetry measurements were utilized to calculate the crystallinity values, while temperature-modulated DSC was employed to investigate the possible mechanism of the different crystalline structures. It was found that these methods can be used to estimate the crystallinity, but the sample parameters and experimental conditions must be taken into consideration. All the techniques showed that the crystallinity depends on GNPs size and content. The distance between dispersed platelets was substantial at low concentrations of GNPs, making it comparatively easy for additional nucleation sites to incorporate the polymer matrix, and the crystal nucleus was simply formed. However, at high concentrations of GNPs, the diffusion of polymer chains to the growing crystallites was hindered by large GNPs particles, despite the formation of additional nucleation sites.

31 March 2017 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
Evangelia TaraniEvangelia Tarani
Evangelia Tarani
Zoi TerzopoulouZoi Terzopoulou
Zoi Terzopoulou
Dimitrios BikiarisDimitrios Bikiaris
Dimitrios Bikiaris
TKTh. Kyratsi
Th. Kyratsi
KCKonstantinos Chrissafis
Konstantinos Chrissafis
GVG. Vourlias
G. Vourlias

1 November 2016 in Thermochimica Acta
Verified
Journal Article
Closed access
Evangelia TaraniEvangelia Tarani
Evangelia Tarani
AWA. Wurm
A. Wurm
Christoph SchickChristoph Schick
Christoph Schick
Dimitrios BikiarisDimitrios Bikiaris
Dimitrios Bikiaris
KCK. Chrissafis
K. Chrissafis
GVG. Vourlias
G. Vourlias

27 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Evangelia TaraniEvangelia Tarani
Evangelia Tarani
KČKlementina Pušnik Črešnar
Klementina Pušnik Črešnar
Lidija Fras ZemljičLidija Fras Zemljič
Lidija Fras Zemljič
KCKonstantinos Chrissafis
Konstantinos Chrissafis
George Z. PapageorgiouGeorge Z. Papageorgiou
George Z. Papageorgiou
Zoi TerzopoulouZoi Terzopoulou
Zoi Terzopoulou
Poly(lactic acid) (PLA) nanocomposites with antimicrobial fillers have been increasingly explored as food packaging materials that are made of a biobased matrix and can minimize food loss due to spoilage. Some of the most commonly studied fillers are zinc oxide (ZnO), titanium dioxide (TiO2), and silver nanoparticles (AgNPs). In this work, nanocomposites with 1 wt.% of each filler were prepared by melt mixing. An extensive study of thermally stimulated processes such as crystallization, nucleation, degradation, and their kinetics was carried out using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). In detail, non-isothermal cold crystallization studies were performed with DSC and polarized light microscopy (PLM), and kinetics were analyzed with multiple equations. The activation energy of the non-isothermal cold crystallization was calculated with the methods of Kissinger and Friedman. The latter was used to also determine the Hoffman–Lauritzen parameters (Kg and U*) by applying the Vyazovkin method. Additionally, effective activation energy and kinetic parameters of the thermal decomposition process were determined by applying the isoconversional differential method and multivariate non-linear regression method. According to TGA results, metal oxide nanofillers affected the thermal stability of PLA and caused a decrease in the activation energy values. Moreover, the fillers acted as heterogenous nucleating agents, accelerating the non-isothermal crystallization of PLA, thus reducing its activation energy. It can be concluded that metal oxide nanofillers catalytically affect the thermal degradation and crystallization of PLA samples.

22 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
NANina Maria Ainali
Nina Maria Ainali
Evangelia TaraniEvangelia Tarani
Evangelia Tarani
AZAlexandra Zamboulis
Alexandra Zamboulis
KČKlementina Pušnik Črešnar
Klementina Pušnik Črešnar
Lidija Fras ZemljičLidija Fras Zemljič
Lidija Fras Zemljič
Dimitrios BikiarisDimitrios Bikiaris
Dimitrios Bikiaris
Packaging applications cover approximately 40% of the total plastics production, whereas food packaging possesses a high proportion within this context. Due to several environmental concerns, petroleum-based polymers have been shifted to their biobased counterparts. Poly(lactic acid) (PLA) has been proved the most dynamic biobased candidate as a substitute of the conventional polymers. Despite its numerous merits, PLA exhibits some limitations, and thus reinforcing agents are commonly investigated as fillers to ameliorate several characteristics. In the present study, two series of PLA-based nanocomposites filled with biobased kraft-lignin (KL) and tannin (T) in different contents were prepared. A melt–extrusion method was pursued for nanocomposites preparation. The thermal stability of the prepared nanocomposites was examined by Thermogravimetric Analysis, while thermal degradation kinetics was applied to deepen this process. Pyrolysis–Gas Chromatography/Mass Spectrometry was employed to provide more details of the degradation process of PLA filled with the two polyphenolic fillers. It was found that the PLA/lignin nanocomposites show better thermostability than neat PLA, while tannin filler has a small catalytic effect that can reduce the thermal stability of PLA. The calculated Eα value of PLA-T nanocomposite was lower than that of PLA-KL resulting in a substantially higher decomposition rate constant, which accelerate the thermal degradation.

1 March 2019 in Corrosion Science
Verified
Journal Article
Closed access
DKDimitra Kourtidou
Dimitra Kourtidou
DCDimitrios Chaliampalias
Dimitrios Chaliampalias
CVChristos Vogiatzis
Christos Vogiatzis
Evangelia TaraniEvangelia Tarani
Evangelia Tarani
AKAikaterini Kamou
Aikaterini Kamou
GVGeorge Vourlias
George Vourlias