Biomass from forestry and agricultural sector provides an important contribution to encounter the government’s targets for increasing bioenergy production and utilization. Characterization of agricultural and forest wastes are critical for exploiting and utilizing them for energy purpose. In the present work agricultural and forest wastes and shrubs were sampled in two sites in north Portugal (Ave and Sabor basin) and subjected to Higher Heating Value (HHV) and chemical composition quantification. The HHV was evaluated according to the methodology described in Standard DD CEN/TS14918:2005. For the lignin content, the procedure was made by the Klason method and the extractives content was determined with the Soxhlet method. For agricultural and forest wastes the HHV values are identical with a range of 17 to 21 MJ·kg⁻¹. However, shrubs biomass presentx slightly higher and statistically different values from agricultural and forest wastes, varying between 19 and 21 MJ·kg⁻¹. Forest wastes contain higher levels of holocellulose compared to agricultural wastes and, with respect to extractive contents, this trend is the reverse. There is a general tendency for the woody components present thermo-chemical properties more suited for energy purposes, than the residues formed by the branches and leaves.

Shrubs growing in former burnt areas play two diametrically opposed roles. On the one hand, they protect the soil against erosion, promote rainwater infiltration, carbon sequestration and support animal life. On the other hand, after the shrubs’ density reaches a particular size for the canopy to touch and the shrubs’ biomass accumulates more than 10 Mg ha⁻¹, they create the necessary conditions for severe wild fires to occur and spread. The creation of a methodology suitable to identify former burnt areas and to track shrubs’ regrowth within these areas in a regular and a multi temporal basis would be beneficial. The combined use of geographical information systems (GIS) and remote sensing (RS) supported by dedicated land survey and field work for data collection has been identified as a suitable method to manage these tasks. The free access to Sentinel images constitutes a valuable tool for updating the GIS project and for the monitoring of regular shrubs’ accumulated biomass. Sentinel 2 VIS-NIR images are suitable to classify rural areas (overall accuracy = 79.6% and Cohen’s K = 0.754) and to create normalized difference vegetation index (NDVI) images to be used in association to allometric equations for the shrubs’ biomass estimation (R² = 0.8984, p-value < 0.05 and RMSE = 4.46 Mg ha⁻¹). Five to six years after a forest fire occurrence, almost all the former burnt area is covered by shrubs. Up to 10 years after a fire, the accumulated shrubs’ biomass surpasses 14 Mg ha⁻¹. The results described in this paper demonstrate that Northwest Portugal presents larger shrubland areas and greater shrub biomass accumulation (average 18.3 Mg ha⁻¹) than the Northeast (average 7.7 Mg ha⁻¹) of the country.

Research Highlights: Biomass from Mediterranean agroforestry vegetation may be a potential source of renewable energy. However, due to the high heterogeneity of this type of resource, the study of its characteristics becomes necessary for its efficient use. Objectives: The aim of this study was to evaluate the thermal and chemical properties of 14 different kinds of agroforestry biomass groups: shrubs, forest, and agricultural wastes. Materials and Methods: The higher heating value (HHV), the elemental analysis (C, H, O, N, S), ashes, mineral elements (Na, K, Ca, Mg, and P), trace elements (Mn, Fe, Zn, Ni, Cu, Cr, and Cd) and halogen elements (F and Cl) were quantified and compared with CEN/TS 147775 and CENS/TS 14961 standards, looking forward to future use for energy purposes, namely through combustion processes, as an alternative to fossil fuels. Results: The shrubs present the highest values of higher heating value (20.5 MJ kg⁻¹), followed by the forest wastes (19.2 MJ kg⁻¹) and the lowest in the agricultural wastes (18.5 MJ kg⁻¹). Concerning the elemental analysis, the difference between groups C, H, and O are very small and not statistically significant, while for N, S and ashes values are higher in agricultural than shrubs and forestry wastes. The same tendency was found for the mineral nutrients. For the trace elements, the lowest content of Mn, Fe, and Zn is found in agricultural, Ni, and Cr content in the shrubs and Cu in the forest wastes. The halogen elements are present in greater amount in shrubs than agricultural and forest wastes. Conclusions: Although the high values of the halogen elements which may raise sintering problems and corrosive effect on metal parts in furnace and boiler, in general the shrubs biomass are those with better characteristics for energy uses, namely through combustion processes.

With the increase of forest fires in Portugal in recent decades, a significant part of woodlands is being converted into shrubland areas. Background: From an ecological point of view, woodlands and shrublands play an essential role, as they not only prevent soil erosion and desertification, but also contribute to soil protection, habitat preservation and restoration, and also increased biodiversity for carbon sequestration. Concerning the shrublands, the assessment of their biomass is essential for evaluating the fuel load and forest fire behavior and also beneficial for obtaining estimates of carbon and biomass for energy use. Methods: In this study, we collected data about the potential shrub biomass accumulation along fifteen years in former burnt areas within North Portugal. Results: The achieved results showed that for a post-fire period ranging from one to 15 years, the accumulated shrubs’ biomass ranged from 0.12 up to 28.88 Mg ha⁻¹. The model developed to estimate the shrub biomass using the time after a fire (age) as a predictor variable presented a high adjustment to data (p-value of the F statistic <0.01 and R² = 0.89), allowing estimating shrub biomass regeneration within former burnt areas with an RMSE of 3.31 Mg ha⁻¹. Conclusions: This paper provides practical information on the availability and assessment of shrub biomass in North Portugal, highlighting the suitability of shrubs as potential sources of biomass.

Aim of study: The study aims to evaluate the maximum potential stocking level in cork oak (Quercus suber L.) woodlands, using the ecologically-based size-density relationship of the self-thinning law.Area of study: The study area refers to cork oak forests in mainland Portugal, distributed along its 18 districts from north to south.Material and Methods: A dataset with a total of 2181 observations regarding pure cork oak stands was collected from the Portuguese Forest Inventory (NFI) databases and from research plots. The dataset was subjected to two filtering procedures, one more restrictive than the other, to select the stands presenting the higher stocking values. The two resulting subsets, with 116 and 36 observations, from 16 and 10 districts of mainland Portugal, respectively, were then used to assess and describe the allometric relationship between tree number and their mean diameter.Main results: The allometric relationship was analysed and modelled using the log transformed variables. A slightly curvilinear trend was identified. Thus, a straight line and a curve were both fitted for comparison purposes. Goodness-of-fit statistics point out for a good performance when the data is set to the uppermost observed stocking values. A self-thinning line for cork oak was projected from the estimated relationship.Research highlights: The self-thinning model can be used as an ecological approach to develop density guidelines for oak woodlands in a scenario of increasing cork demands. The results indicate that the recommendations being applied in Portugal are far below the maximal potential stocking values for the species. It is therefore of the utmost importance to review the traditional silvicultural guidelines and endorse new ones.

Research Highlights: This study bridges a gap of knowledge about the maximum size–density trajectory for juvenile stands of maritime pine. The continuity of the trajectory along the development stages to maturity is assured with a straightforward approach providing support to determine optimum density along all the revolution periods for the species. Background and Objectives: Forest fire is a significant threat to forests in the Mediterranean regions, but also a natural disturbance that plays a vital role in the perpetuation of forest stands. In recent decades, there has been an increase of burnt area in maritime forests in Portugal, followed by an increased interest in managing the natural and usually abundant regeneration occurring after the fires. The gap in the knowledge of growth dynamics for juvenile stages, for these forest systems, currently constrains their correct management, for forest planning, particularly in determining the optimal densities. The study aims to identify the maximum attainable density trajectory at the early stages of development of the species that could support a non-empirical definition of silvicultural prescriptions and thinning decisions, along the revolution. Materials and Methods: A representative data set collected in stands regenerated after fire supports the analysis of the maximum size–density trajectory for the species. Results: The maximum size–density trajectory for the juvenile stands deviates from the expected trajectory defined in the self-thinning line published for the species. Significant deviation occurs at the lower end of the line, indicating the need for a reevaluation of the existing self-thinning line. We propose a new self-thinning model for the species that explicitly considers the behavior of size–density for juvenile stands. The new model assures a logical continuity for the trajectory from the young stages of development to maturity. Conclusions: The proposed model based on the maximum attainable size–density trajectory provides ecological-based support to define silvicultural guidelines for management of the species.