TC18 titanium alloy has been widely applied, but is considered as a difficult machining material. Taking the kerf angle as the quality criterion, this paper studied the cutting performance of TC18 by the use of an abrasive slurry jet (ASJ), based upon multivariate nonlinear regression and SA-BP-AGA. Cutting experiments were carried out according to the Taguchi orthogonal method. The experimental factors included traverse speed, standoff distance, pressure and slurry concentration, with five levels set, respectively. Meanwhile, a characterization method of the major influencing factors was proposed. A multiple nonlinear regression model and a back propagation artificial neural network (BP) prediction model, based on adaptive genetic algorithm (AGA), were established. The reliability was verified by statistics equations for the 22 groups of the fitting or training model and the three groups of experimental results. The BP-AGA and Simulated annealing algorithm (SA) were used to form a set of prediction optimization systems, called integrated SA-BP-AGA. Finally, the results showed that the main factor influencing the kerf angle is the slurry concentration. BP-AGA is easier to model, offers better robustness and is more accurate than a multivariate nonlinear regression model. The best kerf angle can be predicted by the integration system. The study results can improve the performance for the machining of TC18 by ASJ.
To reveal the stress and strain field in rock under abrasive slurry jet (ASJ) impacting, this paper carried out experiments to measure the dynamic rock strain using a novel strain measurement approach, which is the non-contact strain measurement system. Moreover, it was compared with the theoretical analysis of stress propagation in rock. The results showed that dynamic strain will propagate within rock in the form of spherical waves, whose maximum value is proportional to the jet pressure and inversely proportional to the square of the propagation distance. In the process of ASJ impacting rock, strain will increase from zero to a maximum value in milliseconds. Dynamic strain in rock is fluctuates due to the release of internal stress caused by the rock crushing, which can reflect that rock will be broken by ASJ in the form of stepped-failure. The paper reveals the dynamic strain distribution in rock broken by ASJ and provides a new idea and method for studying the rock failure mechanism under ASJ impacting.