The problem of designing deep foundations is related to many civil engineering structures as it is becoming more common and frequent to construct buildings on soft soils. Pile foundation is a popular deep foundation type used to transfer superstructure load into subsoil and bearing layers. However, accurate prediction of piles’ settlement is particularly difficult concerning complicated consolidation process and pile-soil interaction. The objective of this paper is to model a soil-pile system using FEM implemented in Abaqus software. The numerical results of pile bearing capacity and pile settlement were compared with static load test results of CFA piles carried out during construction of Łazienkowska tract flyovers in Warsaw and with engineering analytical calculations according to Eurocode 7 and Polish Standard Code

This paper presents the methodology for predicting the mechanical performance of structural elements made of polymer concrete (PC). A vinyl ester polymer concrete composition and the results of experimental studies to determine the basic mechanical properties of the material are presented. Following the strategy for sustainable development in the building industry, the material cost of polymer concrete was lowered by reducing the consumption of raw materials and the partial replacing of the microfiller fraction with recycled waste products—calcium fly ash. An accurate computational model enabling stress analysis is a convenient way to verify the suitability of PC as a construction material in structural applications. Due to difficulty in deriving an accurate analytical formula, numerical approximation (finite element method) was used as a method for solving the problem. Constitutive modeling of PC is a very important aspect of the strength calculations and here it was done within the framework of elasto-plasticity. Numerical evaluation of the static bearing capacity of PC manhole covers is shown as an example of the proposed FEM methodology. The results of computer simulations were compared with laboratory tests. Finally, the adequacy of the numerical modeling for testing new construction and material improvements is discussed. The study showed that the concrete damaged plasticity material model can be effectively used for the description of PC mechanical behavior.

Geological and geotechnical engineering field tests, like structure drillings and dynamic (DPL, DPSH) or static probing (CPT), are considered for a fundamental source of information about soil and water environments. Since Eurocode 7 has been introduced, it has become more common to use also dilatometers (DMT) or pressure meters (PMT). Results obtained using all the mentioned tests are always of a discrete nature - information is provided in certain points in the field. However, they determine the basis for creating spatial models of geological structure and geotechnical condi- tions of a substratum. The range and number of investigations conducted (including drilling, probing and laboratory tests) influence precision, in which a geological structure is identified and thus, also affect probability of compatibility between spatial model and real geological conditions of a substratum. In the paper, results of non-invasive electrical resistivity tomography (ERT) method are presented, comprising 2-dimensional image of a soil medium resistance. Electrical resistance is a parameter that reflects diversification of a soil medium, considering its lithological aspect. In addition, when combined with drilling results, it can be used to accurate determination of boundaries between soil layers. Carrying out of ERT tests in the field during expressway construction contributed to identification of weak, low-strength soils like organic soils (peat, aggradated mud) and of soft consistency cohesive soils. These kinds of soil are the main cause for unacceptable deformations appearing in the new road engineering structure

The paper presents results of numerical calculations of a diaphragm wall model executed in Poznań clay formation. Two selected FEM codes were applied, Plaxis and Abaqus. Geological description of Poznań clay formation in Poland as well as geotechnical conditions on construction site in Warsaw city area were presented. The constitutive models of clay implemented both in Plaxis and Abaqus were discussed. The parameters of the Poznań clay constitutive models were assumed based on authors’ experimental tests. The results of numerical analysis were compared taking into account the measured values of horizontal displacements.

MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry