Complex studies were carried out to recognize the fen structure and peat properties in the Całowanie Fen area, belonging to the Natura 2000 network. The studies were conducted in two study areas that differ significantly in terms of peat thickness. Electrical resistivity imaging (ERI) was used to identify the properties of the peat and its substrate, such as thickness and electrical resistivity. Comparison of the field studies with the laboratory tests has shown that the ash content rises electrical resistivity in peat. In addition, the study has shown that the application of non-invasive geophysical methods in protected areas is justified. The fen, as a medium containing mostly water, was a proper test area for the ERI measurements.

The policy of the Geological Quarterly is to publish significant contributions of information and geological insight relevant to an international readership

Landslides, as one of the main problems in mountainous areas, are a challenging issue for modern geophysics. The triggers that cause these phenomena are diverse (including geological, geomorphological, and hydrological conditions, climatic factors, and earthquakes) and can occur in conjunction with each other. Human activity is also relevant, undoubtedly contributing to the intensification of landslide phenomena. One of these is the production of artificial snow on ski slopes. This paper presents a multimethod approach for imaging the landslide structure in Cisiec, in southwestern Poland, where such a situation occurs. In the presented work, the integration of remote sensing with multi-method geophysical imaging was used to visualize landslide zones, and to estimate ground motion. To verify the uncertainty of the obtained data, the combination of electrical resistivity tomography (ERT), multi-channel analysis of surface waves (MASW), and seismic refraction method (SRT) was supported by synthetic modeling. Using geophysical data with accurate GPS-based topography and a terrestrial laser scanning-based digital terrain model (DTM), it was possible to model the spatial variability and surface area of the landslide more precisely, as well as to estimate the velocity field in the nearest surface more accurately. The final result shows displacement up to 1 m on the ground surface visible on the DTM models, while the geophysical methods confirm the change in internal structure. The proposed methodology is fast, cost-effective, and can be used to image the structure of landslides, where the shallowest parts are usually complex and thus difficult to observe seismically.

Geological and geotechnical engineering field tests, like structure drillings and dynamic (DPL, DPSH) or static probing (CPT), are considered for a fundamental source of information about soil and water environments. Since Eurocode 7 has been introduced, it has become more common to use also dilatometers (DMT) or pressure meters (PMT). Results obtained using all the mentioned tests are always of a discrete nature - information is provided in certain points in the field. However, they determine the basis for creating spatial models of geological structure and geotechnical condi- tions of a substratum. The range and number of investigations conducted (including drilling, probing and laboratory tests) influence precision, in which a geological structure is identified and thus, also affect probability of compatibility between spatial model and real geological conditions of a substratum. In the paper, results of non-invasive electrical resistivity tomography (ERT) method are presented, comprising 2-dimensional image of a soil medium resistance. Electrical resistance is a parameter that reflects diversification of a soil medium, considering its lithological aspect. In addition, when combined with drilling results, it can be used to accurate determination of boundaries between soil layers. Carrying out of ERT tests in the field during expressway construction contributed to identification of weak, low-strength soils like organic soils (peat, aggradated mud) and of soft consistency cohesive soils. These kinds of soil are the main cause for unacceptable deformations appearing in the new road engineering structure