Decades of mining in South Korea have resulted in the contamination of large amounts of soil by metals. The most feasible approach to site restoration requires the use of a stabilization agent to reduce metal mobility. This study examined the leaching characteristics of limestone used as a stabilization agent when subjected to solutions of differing pH. In a laboratory‐scale column test, solutions with pH values of 3.5, 4.6, and 5.6, representing acidic to nonacidic rainfall, were applied to soil mixed with limestone. Test results indicate that metal components can be released with the addition of acidic solutions, even if the soil is highly alkaline. Cd and Zn, in particular, exhibited abrupt or continuous leaching when exposed to acid solutions, indicating the potential for contamination of water systems as metal‐laden soils are exposed to the slightly acidic rainfall typical of South Korea. Treatment using stabilization agents such as limestone may reduce leaching of metals from the contaminated soil. Stabilizing metal‐contaminated farmland is an economical and feasible way to reduce pollutants around abandoned metal mines.
The use of industrial by-products as admixture to ASTM Type I cement (ordinary Portland cement (OPC)) was investigated with the objective of improving the solidification of organic marine clayey soils. The industrial by-products considered in this paper were oyster-shell powder (OSP), steelmaking slag dust (SMS) and fuel-gas-desulfurized (FGD) gypsum. The industrial by-products were added to OPC at a ratio of 5% based on dry weight to produce a mixture used to solidify organic marine clayey soils. The dosage ratios of mixtures to organic marine clayey soils were 5, 10 and 15% on a dry weight basis. Unconfined compressive strength (UCS) test after 28 days revealed that the highest strength was obtained with the OPC + SMS 15% mixing ratio. The UCS of specimens treated with this mixture was >500 kPa, compared with 300 kPa for specimens treated with a 15% OPC + OSP mixture and 200 kPa when 15% of OPC was used alone. These results were attributed to the more active hydration and pozzolanic reaction of the OPC + SMS mixture. This hypothesis was verified through X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses, and was confirmed by variations in the calcium carbonate (CaCO3) content of the materials during curing.
We investigated the characteristics of metal(loid) transport and dispersion in agricultural soils near an abandoned metal mine. Topsoil samples were collected from 162 sampling sites in the study area, including 1 in the mine tailing dumps, to analyze the total concentrations of As, Pb, Cd, and Zn. Subsequently, the metal(loid) transport and dispersion characteristics were investigated using geographic information system (GIS) technology. The results of this study clearly demonstrated the variation in the dispersal of As, Cd, Pb, and Zn from the mine tailing dumps to nearby agricultural soils and the element-specific spatial variability in their respective transport and dispersion characteristics. These findings suggested that compared with the migration behavior of Cd, Pb, and Zn, that of As has a farther-reaching impact on agricultural soils owing to its geochemical cycling in the soil and groundwater environment. This impact differed significantly in magnitude from that of the other investigated metals. Therefore, special consideration must be given to the migration behavior of As.