Thermal and electrolytic decomposition and ignition of water solutions of hydroxylammonium nitrate (HAN, [NH3OH]+[NO3]−) are investigated. Experiments are conducted to demonstrate the feasibility of electrolytic ignition for HAN-based ionic liquid propellants. As a consequence of electrolysis, the propellant decomposes to NH2OH, HNO3, HONO, HNO, N2O, N2, NO, NO2, H2O, H2(g), and O2(g). These species then initiate a series of gas phase reactions, governed by the H–O–N kinetics scheme, and lead to ignition. Electrochemical mechanisms are established and incorporated into an existing chemical kinetics scheme for thermal decomposition of HAN–water solutions. The analysis treats the liquid and gas phases separately, and matches their respective processes at the interfacial boundary to determine the overall decomposition and ignition characteristics. Results are benchmarked against experimental data for the species evolution in the condensed phase, as well as laser-induced ignition delay of 13 M HAN–water solution. The effects of electric current (0–2.5 A), propellant volume (0.1–0.3 cc), initial temperature (300–450 K), and HAN concentration (9–13 M) on the ignition behaviors are investigated systematically. The ignition delay decreases with increasing electric current as a power-law function: , where A = 3.95 and n = 0.95 for a 0.1 cc 13 M HAN–water solution at an initial condition of 300 K and 1 atm. The exponent n and coefficient A are decreasing functions of the initial temperature. For a given power, decreasing the initial volume of HAN–water solution increases the current density available for electrolysis, and expedites the ignition process. The work represents the first theoretical study of its kind on this topic.
This review article examines the last decade of studies investigating solid, molten, and liquid particle interactions with one another and with walls in heterogeneous multiphase flows. Such flows are experienced in state-of-the-art and future-concept gas turbine engines, where particles from the environment, including volcanic ash, runway debris, dust clouds, and sand, are transported by a fluid carrier phase and undergo high-speed collisions with high-temperature engine components. Sand or volcanic ash ingestion in gas turbine engines is known to lead to power-loss and/or complete engine failure. The particle-wall interactions that occur in high-temperature sections of an engine involve physics and intrinsic conditions that are sufficiently complex that they result in highly disparate and transient outcomes. These particles, which often times are made up of glassy constituents called calcium–magnesium–alumino–silicate (CMAS), are susceptible to phase change at combustor temperatures (1650°), and can deposit on surfaces, undergo elastic and plastic deformation, rebound, and undergo breakup. Considerable research has been put into developing empirical and physics-based models and numerical strategies to address phase interactions. This article provides a detailed account of the conceptual foundation of physics-based models employed to understand the behavior of particle-wall interaction, the evolution of numerical methods utilized for modeling these interactions, and challenges associated with improving models of particle-particle and particle-wall interactions needed to better characterize multiphase flows. It also includes description of a testbed for acquiring canonical data for model validation studies.
The conventional point-particle approach for treating the dispersed phase in a continuous flowfield is extended by taking into account the effect of finite particle size, using a Gaussian interpolation from Lagrangian points to the Eulerian field. The inter-phase exchange terms in the conservation equations are distributed over the volume encompassing the particle size, as opposed to the Dirac delta function generally used in the point-particle approach. The proposed approach is benchmarked against three different flow configurations in a numerical framework based on large eddy simulation (LES) turbulence closure. First, the flow over a circular cylinder is simulated for a Reynolds number of 3900 at 1atm pressure. Results show good agreement with experimental data for the mean streamwise velocity and the vortex shedding frequency in the wake region. The calculated flowfield exhibits correct physics, which the conventional point-particle approach fails to capture. The second case deals with diesel jet injection in quiescent environment over a pressure range of 1.1–5.0MPa. The calculated jet penetration depth closely matches measurements. It decreases with increasing chamber pressure, due to enhanced drag force in a denser fluid environment. Finally, water and acetone jet injection normal to air crossflow is studied at 1atm. The calculated jet penetration and Sauter mean diameter of liquid droplets compare very well with measurements
This study quantitatively investigates the behaviors of single and multiple liquid cylinders placed in the path of a traveling normal shock wave using high-fidelity numerical simulations. The research is motivated by next-generation liquid-fueled scramjet and rotating detonation engines (RDE) where the liquid fuel interacts with shock waves and undergoes deformation, fragmentation, atomization, and vaporization before it mixes with the air and subsequently burns—the focus of this study is on the deformation and interfacial physics. The mathematical formulation to investigate this multiphase problem is based on a modified five-equation Kapila model that incorporates pressure-relaxation, viscous, and surface tension effects. A diffuse interface method is used to capture the liquid–gas interface. Two configurations are studied in this effort: (1) a single column of diameter 22 mm exposed to a shock wave traveling at Mach 2.4 and (2) a two identical cylinder system with diameters of 4.8 mm and 30 mm apart, and exposed to a shock wave moving a Mach number of 1.47. The computational results show excellent agreement with high-speed images and droplet deformation measured in the experiments. For both cases, it is found that the shock and the flow field in its wake leads to the flattening of the cylinder, followed by the formation of instability waves that are amplified by the baroclinic torque and the continuous reflections of the waves transmitted inside the liquid interior, eventually leading to ligament stripping. Based on the spatiotemporal evolution of the liquid and gaseous flowfields, time evolution of shock strength and parent droplet's mass and translation distance are also discussed.