For decades virtual reality and augmented reality (VR and AR) technologies have remained absent from science and engineering workflows due to the custom built nature of the hardware and software and oftentimes highly task-specific design. In addition to high cost, these characteristics create a critical entry barrier for most users to invest in VR and AR applications. Recent developments in both VR and AR technologies in the commercial sector have resulted in the availability of affordable consumer-grade, and reliable VR and AR hardware and software tools. However, significant research is needed to adapt VR and AR technology use for data intensive scientific and engineering applications such as network modeling research, human sciences research, and visualization of complex simulated environments. Our VR and AR applications provide examples of how scientists and engineers can use advanced visualization technologies to perform data analysis and assessment thus transforming scientific discovery.
There has been considerable progress in the area of fuel surrogate development to emulate gasoline fuels’ oxidation properties. The current paper aims to review the relevant hydrocarbon group components used for the formulation of gasoline surrogates, review specific gasoline surrogates reported in the literature, outlining their utility and deficiencies, and identify the future research needs in the area of gasoline surrogates and kinetics model.
This work couples high-fidelity moving-domain finite element compressible flow modeling with a Surrogate Management Framework (SMF) for optimization to effectively design a variable speed gas turbine stage. The superior accuracy of high-fidelity modeling, however, comes with relatively high computational costs, which are further amplified in the iterative design process that relies on parametric sweeps. An innovative approach is developed to reduce the number of iterations needed for optimal design, leading to a significant reduction in the computational cost without sacrificing the high fidelity of the analysis. The proposed design optimization approach is applied to a novel incidence-tolerant turbomachinery blade technology that articulates the stator- and rotor-blade positions of an annular single-stage high pressure turbine to achieve peak performance. This work also extends our understanding of rotor–stator interactions by simulating complex internal flows occurring during multi-speed turbine operation. Potential variable-speed gas turbine stage designs and the proposed optimization approach are presented to provide valuable insight into this new turbomachinery technology that can positively impact future propulsion systems.
This review article examines the last decade of studies investigating solid, molten, and liquid particle interactions with one another and with walls in heterogeneous multiphase flows. Such flows are experienced in state-of-the-art and future-concept gas turbine engines, where particles from the environment, including volcanic ash, runway debris, dust clouds, and sand, are transported by a fluid carrier phase and undergo high-speed collisions with high-temperature engine components. Sand or volcanic ash ingestion in gas turbine engines is known to lead to power-loss and/or complete engine failure. The particle-wall interactions that occur in high-temperature sections of an engine involve physics and intrinsic conditions that are sufficiently complex that they result in highly disparate and transient outcomes. These particles, which often times are made up of glassy constituents called calcium–magnesium–alumino–silicate (CMAS), are susceptible to phase change at combustor temperatures (1650°), and can deposit on surfaces, undergo elastic and plastic deformation, rebound, and undergo breakup. Considerable research has been put into developing empirical and physics-based models and numerical strategies to address phase interactions. This article provides a detailed account of the conceptual foundation of physics-based models employed to understand the behavior of particle-wall interaction, the evolution of numerical methods utilized for modeling these interactions, and challenges associated with improving models of particle-particle and particle-wall interactions needed to better characterize multiphase flows. It also includes description of a testbed for acquiring canonical data for model validation studies.