Antimicrobial photodynamic inactivation represents a promising and potentially greener alternative to conventional antimicrobials, and a solution for multidrug-resistant strains. The current study reports the development and characterization of tetra-substituted diazirine porphyrin covalently bonded to polyethylene terephthalate (PET) and its use as an antimicrobial surface. The diazirine moiety on the porphyrin was activated using a temperature of 120 °C, which initiated a C-H insertion mechanism that irreversibly functionalized the PET surface. Activation of the surface with white LED light in phosphate-buffered saline (PBS) led to singlet oxygen generation, which was detected via the degradation of 9,10-anthracenediylbis(methylene)dimalonic acid (ADMA) over time. The bactericidal effect of the ¹O₂-producing surface against Staphylococcus aureus was determined qualitatively and quantitatively. The growth of the pathogen beneath porphyrin-functionalized PET coupons was reduced; moreover, the PET coupons resulted in a 1.76-log reduction in cell counts after exposure to white LED light for 6 h. This is a promising material and platform for the development of safer antimicrobial surfaces, with applications in healthcare, food packaging, marine surfaces, and other surfaces in the environment.

Biofouling of polyamide membranes is one of the main barriers faced by reverse osmosis (RO) technologies to supply fresh water. Currently, biofouling is addressed by feed water pretreatment using chlorine, followed by membrane cleaning. Chlorine damages polyamide membranes and also generates harmful disinfection byproducts. Thus, safer strategies are needed to prevent biofouling in polyamide membrane systems. This review investigates the applicability of the following non-oxidizing biocides in preventing and controlling biofouling in RO systems, including their antimicrobial efficiency, hazard levels, membrane compatibility, and applicability to drinking water treatment: (1) 2,2-dibromo-3-nitrilopropionamide (DBNPA); (2) 2-methyl-4-isothiazolin-3-one (MIT); (3) sodium bisulfite (SBS), (4) phenoxyethanol (PE), (5) sodium benzoate (SB). According to this review, MIT and DBNPA present most of the features attributed to an ideal anti-biofouling chemical but also are the most hazardous biocides. Due to safety and efficacy, none of the five chemicals were determined to be the final solution to address membrane biofouling. However, alternative RO biocide research is in early development and requires further investigation via biofouling prevention studies. Therefore, future research efforts on the investigation of economic, eco-friendly, and safe antifouling agents to prevent and treat biofouling in RO systems are paramount to promote sustainable water supply in water-stressed countries.