Biofouling of polyamide membranes is one of the main barriers faced by reverse osmosis (RO) technologies to supply fresh water. Currently, biofouling is addressed by feed water pretreatment using chlorine, followed by membrane cleaning. Chlorine damages polyamide membranes and also generates harmful disinfection byproducts. Thus, safer strategies are needed to prevent biofouling in polyamide membrane systems. This review investigates the applicability of the following non-oxidizing biocides in preventing and controlling biofouling in RO systems, including their antimicrobial efficiency, hazard levels, membrane compatibility, and applicability to drinking water treatment: (1) 2,2-dibromo-3-nitrilopropionamide (DBNPA); (2) 2-methyl-4-isothiazolin-3-one (MIT); (3) sodium bisulfite (SBS), (4) phenoxyethanol (PE), (5) sodium benzoate (SB). According to this review, MIT and DBNPA present most of the features attributed to an ideal anti-biofouling chemical but also are the most hazardous biocides. Due to safety and efficacy, none of the five chemicals were determined to be the final solution to address membrane biofouling. However, alternative RO biocide research is in early development and requires further investigation via biofouling prevention studies. Therefore, future research efforts on the investigation of economic, eco-friendly, and safe antifouling agents to prevent and treat biofouling in RO systems are paramount to promote sustainable water supply in water-stressed countries.
Cultivated kelps are a scalable marine feedstock for renewable polymers, but regional aquaculture supply chains lack engineering benchmarks for the alginate yield and quality. Here, we apply a lower-hazard citrate-based process to quantify bioplastics-relevant alginate metrics across cultivated northeast Pacific kelps from commercial farms in British Columbia (Canada) and Alaska (USA). Ten blade biomass samples spanning five species were screened. Two samples failed to undergo phase separation after extraction and centrifugation, indicating biomass-dependent extractability as a process risk. For the remaining eight feedstocks, yields ranged from 11.95 to 26.11% (dry weight). Weight-average molar mass (Mw) ranged from 36.6 to 623 kDa, with 7/8 samples exceeding 400 kDa. Uronic acid composition spanned M/G = 0.14–1.38, with variation in G/M block compositions (block fractions and block lengths) relevant to cross-linking. Multivariate analysis resolved dominant gradients linking the uronic acid composition and molar mass distributions. The studied kelps were evaluated in the context of known seasonal, tissue-specific, and environment-driven effects and climate-related stressors that can alter productivity. Collectively, these results provide a regional benchmark for lower hazard alginate production from cultivated kelps and an engineering screening framework to support consistent feedstock selection for scalable manufacturing of alginate-based films, coatings, and related bio-based materials.