In this work, Sacha inchi (Plukenetia volubilis L.) residues were used as biomass feedstocks in catalytic upgrading pyrolysis with SBA-15, which is a substance synthesized from coal fly ash (CFA), using alkali fusion, followed by hydrothermal treatment (SBA-15-FA). The catalytic activity of fly ash-derived SBA-15 was investigated through the fast pyrolysis of Sacha inchi residues for upgrading the pyrolysis vapors using the analytical pyrolysis-GC/MS (Py-GC/MS) technique. The pyrolysis temperature was set at 500 °C and held for 30 s while maintaining the Sacha inchi residues to catalyst ratios of 1:0, 1:1, 1:5, and 1:10. In addition, the SBA-15s synthesized from chemical reagent and commercial SBA-15 were evaluated for comparison. The non-catalytic fast pyrolysis of Sacha inchi (SI) mainly consisted of fatty acids (46%), including chiefly linoleic acid (C18:2). Other compounds present were hydrocarbon (26%) and nitrogen-containing compounds (8.7%), esters (9.0%), alcohols (6.4%), and furans (3.6%). The study results suggested that the SBA-15-FA showcased a high ability to improve aliphatic selectivity (mainly C5–C20) and was found to be almost 80% at the biomass to catalyst ratio of 1:5. Moreover, the increase in catalyst contents affected the enhancement of hydrocarbons yields and tended to promote the deoxygenation reaction. Interestingly, the catalytic performance of SBA-15 derived from fly ash could be compared to that of the commercial SBA-15 in terms of producing hydrocarbon compounds as well as reducing oxygenated compounds.
13 July 2022 in International Journal of Minerals, Metallurgy and Materials
This study addresses the challenge of fabricating cost-effective tubular ceramic membranes through agar gelcasting. The addition of rice starch as the pore-forming agent in the ceramic membrane support layer, with varying contents from 0 to 6 wt%, was focused on improving the permeability of the tubular ceramic membrane. Scanning electron microscopy (SEM) revealed the co-existence of large pores from starch decomposition and small pores in the form of interparticle voids. When the rice starch was enhanced, the firing shrinkage and apparent porosity increased, and the bulk density decreased. Notably, the tubular ceramic membranes with 6 wt% of the rice starch addition exhibited a permeability of 0.17 Lh⁻¹m⁻²bar⁻¹ under a pressure of 2.5 bar.