This paper presents an experimental study of the vibration and the acoustic noise emitted by inverter-fed induction machines (IMs). The IM fits many applications, due to its cost efficiency and simple construction. Moreover, IMs are characterized by low maintenance, high efficiency, long life, low weight and compactness.However, many applications are also acoustic noise and vibration sensitive. Hence, research is today focusing on the acoustic and vibration performances of induction machines. In the automotive sector, limiting noise and vibration is one of the major factors to improve the driving comfort.In this work, a SVPWM based control techniques has been used to control the phase voltages of one three-phase induction motor, in order to perform vibration and acoustic noise experimental analysis. Experimental results, obtained by performing laboratory tests, have been performed and are discussed.
In modern aircraft, energy supply management has become a critical matter, since many aboard electrical loads have to be supplied, especially those related to flight safety. However, at the same time, the size and weight of electrical generators must be limited because of their on-board installation. In this paper, the Mixed Integrated Linear Programming (MILP) methodology has been used to formulate the Supervisor definition of the direct current (DC) microgrid (MG) on-board system with an extension for the programmable loads. Due to the problem of dimension increase, two methods have been presented and tested to perform optimal energy management (EM) aboard an aircraft: the Branch and Bound (B&B) and the Linear Regression Approximation (LRA). Finally, numerical simulations and results have been provided to validate the proposed optimization methodologies, according to the dimensions and the complexity of the problem.
Today, self-excited synchronous machines are the object of increasing interest because they use neither brushes nor permanent magnets. In fact, the price of rare earth metals is considerably high and still raising. This is the main reason why researchers are looking for suitable alternatives to permanent magnets in the construction of rotating electrical machinery. This paper deals with the design and laboratory testing of a synchronous machine with an efficient layout and an economic construction. The proposed self-excited machine exploits the space harmonics of the magneto-motive force to produce the excitation field. The model analysis is based on the computation of the back EMFs that are associated to the magneto motive force components. The mathematical model suggests an easy way to decouple the rotor windings. The machine has been built and experimental tests have been performed in order to validate the electrical behavior.
9 November 2021 in IEEE Transactions on Energy Conversion
A new vector-phasor combined with an analytic method for solving complex flux distributions is proposed. The flux leakage and losses in the end region of a 1266 MW scale generator are analyzed by both finite element simulation and an analytical method. The deviation of the calculated result between the analytical model and the finite element method is very small. The analytical model can acquire current data for fast prediction of the flux density. The analytical and numerical results of the flux distribution are found to be in a satisfactory agreement. In addition, the ability to reduce the eddy current losses in the end regions is also researched using various of structural solutions.