The ability to measure, understand, manipulate, organize, engineer and control matter on the nanoscale has been opening up the wealth of possibilities that were otherwise non -existent at higher scales. At this scale, basic research principles and tools in biology, physics, chemistry, and engineering converge and have led to all-inclusive applications of nanotechnology. Despite the innovative applications and promising potentials of nanotechnology, there are concerns about its short and long-lasting impacts on humans, nature and the environment. In an attempt to address these concerns, a number of researches have been conducted. Evaluations of studies addressing the issues of nanotechnologies and their impacts are necessary to give insights for further studies that will advance the technology for the true benefit of mankind and nature. This study, thus, provides a detailed review of studies on nanotechnology applications and the positions of stakeholders on the impact of nanotechnology. Among other things, the outcome of this survey shows that there are numerous successful applications of nanotechnology. Public perceptions are pivotal in determining the extent of revolution and transformation that nanotechnology will have on the environment. Religious beliefs and moral concerns; trust in governmental regulatory agencies and the industry; the level of inclusion of the society in the product design, development, and commercialization process is critical to the extent of acceptance of nanotechnology inventions. Expression of objective views concerning the benefits, limitations & risks, and adequate education of the public, risk regulators & all stakeholders are crucial in determining the fate of nanotechnology.
20 September 2018 in IET Renewable Power Generation
This study proposes a multi‐objective mathematical optimisation model which includes minimisation of the investment costs of new offshore wind farm units, investment costs of new transmission lines, fuel costs, emissions of the fossil fuel generators as well as the maximisation of incentives for new generating units. The mathematical model can be used to determine the optimal expansion planning for generation and transmission facilities with consideration of the impact of location and feed‐in tariffs for offshore wind power on the overall system capacity and efficiency. The proposed model is solved using CPLEX 12.6.3 solver in advanced interactive multidimensional modelling system and tested on the modified Garver 6‐bus test system and the IEEE 24‐bus reliability test system. Simulation results indicate that improving the incentive support scheme and minimisation of the total cost will improve the effective utilisation of offshore power.
1 March 2020 in Journal of Renewable and Sustainable Energy
Modern power system exploitation of large-scale Renewable Energy Sources (RESs) is prevalent due to the RES effect of reducing the heavy dependence on fossil fuels and the resultant power quality improvement. Therefore, this paper investigates the reliability assessment of a power system with integration of large-scale RESs with emphasis on their impacts on the expansion planning procedure. A multi-state Markov model is proposed to analyze the availability and reliability of the stochastic nature of RESs and High Voltage Direct Current transmission links. A Mixed Integer Nonlinear Programming model is developed to minimize the total investment and operation cost of the generating units and the cost associated with power outage as well as improving power system reliability. An Outer Approximation Algorithm, a powerful solver embedded in the Advanced Interactive Multidimensional Modeling System, was employed in solving the proposed model and implemented using the IEEE 6- and 24-bus Roy Billinton Test System to demonstrate its effectiveness. The results obtained from the simulation reveal that the proposed model performance achieves effective reliability and an enhanced voltage profile.
Renewable energy sources (RES) are seen as potential alternative energy sources for rural communities to meet energy demand where electricity supply is inaccessible. Wind and Photo-Voltaic (PV) power is seen as mature and sustainable alternatives for rural electrification. This paper discusses the optimal power dispatch for hybrid combined heat and power (CHP), wind, PV and battery systems with a view to determining the operation of the hybrid system for farming applications. This is accomplished by considering the basic power system probability concepts to assess the performance of the reliability indices. The proposed mathematical model seeks to minimize the system operation costs from CHP. The developed model was validated on five case studies with the same load profile, solar radiation, wind speed and CHP generating unit parameters and solved using a CPLEX solver embedded in Algebraic Modelling Language. The sensitivity analysis performed indicates that the hybrid system achieved a higher reliability as compared to other case studies. The result shows 48% of energy cost reduction is achievable when considering the proposed hybrid CHP, wind, PV and battery system as compared to energy supply via CHP.
This study evaluates the technical, economic and environmental benefits of renewable energy resources (RER) for electricity supply to large size buildings in an educational institution. The cost of energy generation coupled with the epileptic power supply has led to the demand for an alternative source of energy supply to an education institution in Nigeria. The essence of renewable energy generation is becoming more glaring and a hybrid energy system (HES) is believed to deliver efficient and sustainable energy for the institutions; this paper aims to analyse the techno-economic assessment of a HES design setup at the College of Engineering, Afe Babalola University Ado-Ekiti for powering the university buildings; this grid connected system was assessed with various system configurations was simulated using hybrid optimization model for electric renewables (HOMER) software and the levelized cost of energy (LCOE) with the consideration of the HES benefits was developed. The results obtained from the simulation indicate that the grid and solar Photovoltaic (PV) system provide an optimal system that adequately meets the load demand with more renewable energy integration and this significantly reduces the cost of energy by 45% and also causes a 32.09% reduction in CO2 emissions; this configuration is environmentally sustainable and financially suitable for electrifying an educational institution.
1 September 2018 in Journal of Renewable and Sustainable Energy
In composite expansion planning, improving the efficiency and power quality of power supplied from Renewable Energy Sources (RES) is highly essential. Therefore, this paper focuses on developing an optimal power flow optimization model for minimizing power loss and harmonics emanating from RES with emphasis on reducing their impact on the Locational Marginal Prices. In order to assess the magnitude of harmonics, grid modelling and simulation with RES such as wind and solar energy were carried out using the Electrical Transient Analyzer Program 12.6.0 software. The proposed mixed integer nonlinear programming mathematical model was solved using the Outer Approximation Algorithm solver in the advanced interactive multidimensional modelling system, and the efficiency of the model was tested on the modified IEEE 6 bus and 24 bus system. The results obtained from simulations reveal the efficiency of the proposed model in terms of effective cost reduction, nodal marginal price reduction, minimization of harmonic losses, and additional lines in the power system network.