Modification of vacuum chamber surface properties by introducing a layer of material with low secondary electron yield (SEY) is one of the most useful solutions to suppress the electron-cloud in high-energy particle accelerators. In the present work, amorphous carbon thin films have been produced by DC magnetron sputtering with Neon and Argon sputtering gases. Microstructures of the thin films have been characterized by using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The sp2 and sp3 hybridized carbon atoms are evaluated using X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The amorphous carbon coatings comprise tiny granularities of tens of nanometers. The amorphous carbon films show more graphite-like properties as revealed by XPS and Raman spectroscopy. The secondary electron emission measurement results indicate that amorphous carbon coatings present SEY of <1.2. The thin film deposited by Ne exhibits a higher sp2 hybridization content, leading to a slightly lower SEY compared with the film produced with Ar.
6 August 2018 in IEEE Transactions on Nuclear Science
In this paper, the effect of air exposure and acetone cleaning on the secondary electron yield (SEY) of laser treated copper applied in accelerators for the inhibition of electron cloud was investigated and discussed. The SEY of laser treated copper samples after acetone cleaning and air exposure was measured. After 10-21 months air exposure, the maximum SEY increased by about 11%-20%. Furthermore, changes of carbon, copper, and oxygen chemistry states from sample surface after acetone and air exposure were studied by means of X-ray photoelectron spectroscopy. The XPS results show that the concentration of Cu from the surface of the samples with the thickness of 500 and 20 μm decreased by about 61%-70% after acetone cleaning and decreased by a further 36%-70% after 10-21 months air exposure. Moreover, the XPS measurement reflects the significant increase of the total percentages of C and O after acetone cleaning, and further increase after 10-21 months air exposure. The increase of SEY is explained in terms of the introduction of impurities, such as oxide and carbide.