For phase-controlled vacuum breakers, the acting time of the actuator should be precise. The variation of capacitor voltage, capacitance, and environmental temperature impact the dispersion of closing time seriously. A new technology has been put forward in this paper. It is the speed control of the vacuum breaker. This technology can be used for phase-controlled operation of vacuum breakers. By using this technology, the deviation of displacement can be corrected in real time. So the permanent-magnetic actuator (PMA) can move along with the given displacement curve. Also, the closing time is stable when the external factors, such as capacitor voltage, capacitance, and environment temperature change. The closed-loop system has been established in this paper. The proportion-differentiation (PD) algorithm and fuzzy algorithm are used in the system. The PD algorithm adjusts the coil current to ensure that different actuators have the same excitation time. And the fuzzy algorithm is used to adjust actuator displacement. With the use of the algorithm, the closing time of the breaker is stable, and mechanical properties are optimal. Based on the aforementioned theory, many experiments have been performed when external factors change, such as environment temperature, capacitance, and so on. The results prove that the displacement deviation can be corrected using this method and the closing time can be stabilized within ±0.5 ms. Therefore, not only can the accuracy of phase-controlled operation can be ensured, but the lifespan of the circuit breaker can also be prolonged.

Vacuum arc commutation is an important process in natural-commutate hybrid direct current (DC) circuit breaker (NHCB) interruption, as the duration of vacuum arc commutation will directly affect the arcing time and interrupting time of NHCB. In this paper, the vacuum arc commutation model of NHCB was established by simplifying solid-state switch (SS) and vacuum arc voltage. Through theoretical analysis and experiments, the vacuum arc commutation characteristics of NHCB were studied. The mathematical formula of the effect of main parameters on the duration of vacuum arc commutation is obtained, and the changing law of the influence of the main parameters on the duration of the vacuum arc commutation is explored. The concept of vacuum arc commutation coefficient is proposed, and it is a key parameter that influences the vacuum arc commutation characteristics. The research on the characteristics of vacuum arc commutation can provide theoretical foundation for the structure and parameter optimization of NHCB and other equipment that uses vacuum arc commutation.

To ensure the reliability of power supply, a dual power supply structure appears in the power distribution system. Power supply switching is a complex physical process. This paper presents a novel model of electromechanical contactors. This model can simulate the multi-physics process of power switching. This article completes the simulation framework for power switching through contactors for the first time. Among them, the structural topology for contactors is also proposed. On the basis of the novel structure topology, an equivalent magnetic circuit model is established to calculate the relationship between driving force, flux linkage, current, and displacement. Then, a co-simulation model is established between the above equations and Adams to obtain the speed characteristics and flight time of the contactor. Subsequently, through the use of Fluent and its secondary development, a magnetohydrodynamic model is established, and the above-mentioned velocity characteristics are imported into it to analyze the arcing characteristics of the contacts under the conditions of the transverse magnetic field and the insulating grid. The effectiveness of power switching is judged by comparing the flight time of the electromechanical model and the arcing time of the magnetohydrodynamic model. The prototype is manufactured and tested on the basis of simulation. Through experimental waveforms and high-speed photography, the accuracy of the simulation model and the practicability of the contactor are verified.