Magnetic refrigeration exploits the magnetocaloric effect, which is the entropy change upon the application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials that exhibit a large magnetocaloric effect, these properties remain unknown for a substantial number of compounds. To explore new functional materials in this unknown space, machine learning is used as a guide for selecting materials that could exhibit a large magnetocaloric effect. By this approach, HoB2 is singled out and synthesized, and its magnetocaloric properties are evaluated, leading to the experimental discovery of a gigantic magnetic entropy change of 40.1 J kg−1 K−1 (0.35 J cm−3 K−1) for a field change of 5 T in the vicinity of a ferromagnetic second-order phase transition with a Curie temperature of 15 K. This is the highest value reported so far, to the best of our knowledge, near the hydrogen liquefaction temperature; thus, HoB2 is a highly suitable material for hydrogen liquefaction and low-temperature magnetic cooling applications.
An elusive pocket: Superconductivity in copper oxide materials emerges by doping a special kind of correlated state called the Mott insulator. However, studying what happens when a small concentration of charge carriers—holes or electrons—is added to a Mott insulator is experimentally challenging. It has been predicted that the so-called “Fermi pockets” should become visible during experimentation, but such pockets have not been unambiguously observed. Kunisada et al. studied the unusual cuprate Ba 2 Ca 4 Cu 5 O 10 (F,O) 2 , which has five copper oxide planes in a unit cell, whereas most cuprates have one or two (see the Perspective by Vishik). They observed two Fermi pockets in both photoemission and quantum oscillations data, with the innermost copper oxide planes playing a crucial role. Science , this issue p. 833 ; see also p. 775
29 October 2020 in Superconductor Science and Technology
A diamond anvil cell (DAC) has become an effective tool for investigating physical phenomena that occur at extremely high pressure, such as high-transition temperature superconductivity. Electrical transport measurements, which are used to characterize one of the most important properties of superconducting materials, are difficult to perform using conventional DACs. The available sample space in conventional DACs is very small and there is an added risk of electrode deformation under extreme operating conditions. To overcome these limitations, we herein report the fabrication of a boron-doped diamond microelectrode and undoped diamond insulation on a beveled culet surface of a diamond anvil. Using the newly developed DAC, we have performed in-situ electrical transport measurements on sulfur hydride H 2 S, which is a well-known precursor of the pressure-induced, high-transition temperature superconducting sulfur hydride, H 3 S. These measurements conducted under high pressures up to 192 GPa, indicated the presence of a multi-step superconducting transition, which we have attributed to elemental sulfur and possibly HS 2 .
22 January 2020 in Science and Technology of Advanced Materials
Recently, a massive magnetocaloric effect near the liquefaction temperature of hydrogen has been reported in the ferromagnetic material HoB2. Here we investigate the effects of Dy substitution in the magnetocaloric properties of Ho1-xDyxB2 alloys (x = 0, 0.3, 0.5, 0.7, 1.0). We find that the Curie temperature (TC) gradually increases upon Dy substitution, while the magnitude of the magnetic entropy change |ΔSM| and adiabatic temperature change ΔTad showed a gradual decrease. On the other hand, due to the presence of successive transitions in these alloys, the peak height of the above magnetocaloric properties tends to be kept in a wide temperature range, leading to a relatively robust figure of merit in a wide temperature span. These alloys could be interesting candidates for magnetic refrigeration in the temperature range of 10–60 K. Graphical abstract
Temperature and pressure are essential parameters in the synthesis, evaluation, and application of functional materials. This study proposes the addition of a heating function to a high-pressure diamond anvil cell (DAC) with in situ measurement probes. The proposed DAC allows for simultaneous control of temperature and pressure within the sample space and can be used to synthesize functional materials under extreme conditions. The various components, namely, the heater, thermometer, and measurement probes, were fabricated with a boron-doped diamond epitaxial film and could be repeatedly used. The developed DAC was used to conduct the high-pressure annealing of a La(O,F)BiS2 single crystal and the high-pressure synthesis of EuFBiS2 superconductors. The proposed technique shows promise for further exploration of superconductors to broaden the research field.
We report the pressure effect in Bi2Sr2Ca2Cu3O10+δ (Bi-2223) single crystal with a small amount of intergrowth of Bi2Sr2CaCu2O8+δ (Bi-2212). Their superconducting transition temperatures Tcs showed a dome-like shape as a function of pressure, which showed a good agreement with the general relation between the carrier concentration and Tc. Our experimental results indicate that high pressure can induce effective carrier doping into the multilayered high-Tc cuprate superconductor.