Magnetic refrigeration exploits the magnetocaloric effect, which is the entropy change upon the application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials that exhibit a large magnetocaloric effect, these properties remain unknown for a substantial number of compounds. To explore new functional materials in this unknown space, machine learning is used as a guide for selecting materials that could exhibit a large magnetocaloric effect. By this approach, HoB2 is singled out and synthesized, and its magnetocaloric properties are evaluated, leading to the experimental discovery of a gigantic magnetic entropy change of 40.1 J kg−1 K−1 (0.35 J cm−3 K−1) for a field change of 5 T in the vicinity of a ferromagnetic second-order phase transition with a Curie temperature of 15 K. This is the highest value reported so far, to the best of our knowledge, near the hydrogen liquefaction temperature; thus, HoB2 is a highly suitable material for hydrogen liquefaction and low-temperature magnetic cooling applications.
20 December 2018 in Science and Technology of Advanced Materials
Candidate compounds for new thermoelectric and superconducting materials, which have narrow band gap and flat bands near band edges, were exhaustively searched by the high-throughput first-principles calculation from an inorganic materials database named AtomWork. We focused on PbBi2Te4 which has the similar electronic band structure and the same crystal structure with those of a pressure-induced superconductor SnBi2Se4 explored by the same data-driven approach. The PbBi2Te4 was successfully synthesized as single crystals using a melt and slow cooling method. The core level X-ray photoelectron spectroscopy analysis revealed Pb2+, Bi3+ and Te2- valence states in PbBi2Te4. The thermoelectric properties of the PbBi2Te4 sample were measured at ambient pressure and the electrical resistance was also evaluated under high pressure using a diamond anvil cell with boron-doped diamond electrodes. The resistance decreased with increasing of the pressure, and pressure-induced superconducting transitions were discovered at 2.5 K under 10 GPa. The maximum superconducting transition temperature increased up to 8.4 K at 21.7 GPa. The data-driven approach shows promising power to accelerate the discovery of new thermoelectric and superconducting materials. GRAPHICAL ABSTRACT
Candidates for new thermoelectric and superconducting materials, which have narrow band gaps and flat bands near band edges, were searched by high-throughput first-principles calculation from an inorganic materials database. The synthesized SnBi2Se4 among the target compounds showed a narrow band gap of ~200 meV and a thermal conductivity of ~1 WK−1m−1 at ambient pressure. The sample SnBi2Se4 showed a metal–insulator transition at 11.1 GPa, as predicted by theoretical estimation. Furthermore, two pressure-induced superconducting transitions were discovered under 20.2 and 47.3 GPa. The data-driven search is a promising approach to discovering new functional materials.
29 October 2020 in Superconductor Science and Technology
A diamond anvil cell (DAC) has become an effective tool for investigating physical phenomena that occur at extremely high pressure, such as high-transition temperature superconductivity. Electrical transport measurements, which are used to characterize one of the most important properties of superconducting materials, are difficult to perform using conventional DACs. The available sample space in conventional DACs is very small and there is an added risk of electrode deformation under extreme operating conditions. To overcome these limitations, we herein report the fabrication of a boron-doped diamond microelectrode and undoped diamond insulation on a beveled culet surface of a diamond anvil. Using the newly developed DAC, we have performed in-situ electrical transport measurements on sulfur hydride H 2 S, which is a well-known precursor of the pressure-induced, high-transition temperature superconducting sulfur hydride, H 3 S. These measurements conducted under high pressures up to 192 GPa, indicated the presence of a multi-step superconducting transition, which we have attributed to elemental sulfur and possibly HS 2 .
9 March 2017 in Japanese Journal of Applied Physics
A novel diamond anvil cell specialized for resistivity measurements under high pressure have been developed. Boron-doped metallic diamond electrodes were deposited onto a nano-polycrystalline diamond anvil using a microwave plasma-assisted chemical vapor deposition technique combined with electron beam lithography. The various designs of boron-doped metallic diamond electrodes were demonstrated, and they showed no signs of degradation after repeated compression.