In this paper, for the first time, we present a computational study on the electrical behavior of the field-effect tunneling transistor based on vertical graphene-MoS2 heterostructure and vertical graphene nanoribbon-MoS2 heterostructure. Our simulation is based on nonequilibrium Green's function formalism along with an atomistic tight-binding(TB) model. The TB parameters are obtained by fitting the bandstructure to first-principle results. By using this model, electrical characteristics of device, such as ION/IOFF ratio, subthreshold swing, and intrinsic gate-delay time, are investigated. We show that the combination of tunneling and thermionic transport allows modulation of current by four orders of magnitude confirming experimental results. The results indicate that the increase of MoS2 layer numbers leads to a higher ION/IOFF ratio but degrades the intrinsic gate-delay time. Furthermore, it can be observed from the results that as the ribbon width increases the ION of device increases at the cost of a lower ION/IOFF ratio.
Recently, 2D halide perovskites have attracted attention because they are excellent photo absorbing materials for perovskite solar cells. To date, the majority of 2D perovskite-based devices have been made of Pb, a material with toxic properties and environmental concerns. Thus, lead-free alternatives are essential to enable the expansion of photovoltaic systems based on perovskites. Herein, we examine the structural, electronic, optical and stability properties of Pb-free 2D Ruddlesden–Popper (RP) perovskites (BA)2(MA)n−1GenI3n+1 (BA = CH3(CH2)3NH3+; MA = CH3NH3+; n = 1-5, and ∝) by using DFT calculations and comparing the results to their Pb-based counterparts (BA)2(MA)n−1PbnI3n+1 (n = 1–5, and ∝). Theoretical analysis indicates that Pb and Ge-based 2D perovskites are significantly more thermodynamically stable than their corresponding 3D materials. A more accurate bandgap is achieved using the HSE06 + SOC scheme and compared to the findings of the PBE and PBE + SOC. These materials are direct bandgap semiconductors. Due to spin–orbit coupling, Pb-based perovskite displays higher Rashba energy splitting than Ge-based ones. The bandgap changes from 2.37 eV (n = 1) to 1.79 eV (n = 5), and from 1.92 eV (n = 1) to 1.56 eV (n = 5) for Pb and Ge-based perovskites, respectively. The bandgap of all Ge-based perovskites is lower than their corresponding Pb-based ones. We show that the 2D perovskites could serve as hole-transporting materials when they are alongside 3D perovskites. The trade-off between thermodynamic stability and absorption coefficient of the considered compounds indicates that 2D RP perovskites BA2MA4Ge5I16 are promising Pb-free halide semiconductors for solar cell applications.