Jute is the golden fiber of Bangladesh, but its production is declining due to the involvement of higher production and processing costs, where a major portion of the cost is needed for fiber extraction. Labor unavailability and increasing labor cost have led to higher jute fiber production cost. To address these issues, this study looks at the development of a power-operated and cost-effective fiber extraction machine aiming at reducing the production cost. The study was conducted at the Rangpur regional office premises of Practical Action in Bangladesh, and the developed machine was branded as “Aashkol”, which had the following major parts: a feeding tray, a primary extraction roller, a secondary extraction roller, grabbing rollers, fiber collection stand, base frame, protection cover, and a spring-loaded tray under the primary extraction roller. The Aashkol can extract green ribbon from the jute stem, but jute sticks were broken down into smaller pieces (3–6 cm). The performance evaluation of the machine was conducted using different types of jute (Deshi, Kenaf, and Tossa) and compared with another jute extraction machine (KP model, introduced by Karupannya Rangpur Ltd.). The Aashkol-based extraction and improved retting systems were also evaluated and compared with traditional jute extraction systems. The jute stem input capacity (4.99 t h⁻¹) of the Aashkol was 47.6% higher than the KP model (3.38 t h⁻¹). Compared with the traditional system, across jute types, the Aashkol produced a 9% higher fiber yield and saved 46% retting time. Overall, the Aashkol reduced 90% of the labor requirement and saved 11.6 USD t⁻¹ in jute fiber extraction and retting than the traditional method.

Conservation agriculture (CA) based production systems may help in achieving more sustainable intensification of cropping systems that use less labour and energy and have higher profit margins, in addition to soil conservation and environmental impact mitigation advantages. But these objectives can only be achieved when the right mechanization options, including appropriate crop establishment equipment, are in place to assist in timely field operations. An urgent need exists, therefore, to fine tune and re-adjust the existing two-wheel tractor (2WT) operated seed drills, with specific reference to the design of blade and furrow openers, while at the same time considering performance in different soil types and environments. To this end, experiments were conducted during 2013-2014 and 2014-2015 at two BARI Regional Agricultural Research Stations in Jamalpur and Barisal, Bangladesh, on a loam and clay loam soil, respectively, to evaluate five types of furrow opener for strip tillage. Shoe and modified shoe-type furrow openers were tested and compared with three inverted-T furrow openers with rake angles of 75, 65 and 55. The newly designed inverted-T furrow openers were narrower than the shoe-type openers; they also had a longer, hollow shanks and provided better options for adjustment to achieve the desired seeding depth and line spacing. Compared to shoe-type openers, better seeding depth, uniformity and higher degree of seed coverage were recorded with use of the inverted-T furrow opener with a 65 rake angle. This resulted in better seed coverage in the furrow, a higher emergence rate index, and the highest emergence percentage of maize and mung bean. Our research fmdings can be generalized to smallholder production systems on loam and clay loam soils where farmers utilize 2WT operated seed drills for crop establishment in both traditional and conservation agriculture-based planting systems.