Jimin Lee

Dr. Jimin Lee


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2019 in Sensors
Verified
Journal Article
Open access
PDF file
BCByoung-Soo Choi
Byoung-Soo Choi
JLJimin Lee
Jimin Lee
SKSang-Hwan Kim
Sang-Hwan Kim
SCSeunghyuk Chang
Seunghyuk Chang
JPJongHo Park
JongHo Park
JSJang-Kyoo Shin
Jang-Kyoo Shin
A complementary metal oxide semiconductor (CMOS) image sensor (CIS), using offset pixel aperture (OPA) technique, was designed and fabricated using the 0.11-µm CIS process. In conventional cameras, an aperture is located on the camera lens. However, in a CIS camera using OPA technique, apertures are integrated as left-offset pixel apertures (LOPAs) and right-offset pixel apertures (ROPAs). A color pattern is built, comprising LOPA, blue, red, green, and ROPA pixels. The disparity information can be acquired from the LOPA and ROPA channels. Both disparity information and two-dimensional (2D) color information can be simultaneously acquired from the LOPA, blue, red, green, and ROPA channels. A geometric model of the OPA technique is constructed to estimate the disparity of the image, and the measurement results are compared with the estimated results. Depth extraction is thus achieved by a single CIS using the OPA technique, which can be easily adapted to commercial CIS cameras.

10 September 2018 in IEEE Sensors Journal
Verified
Journal Article
Closed access
BCByoung-Soo Choi
Byoung-Soo Choi
SKSang-Hwan Kim
Sang-Hwan Kim
JLJimin Lee
Jimin Lee
DSDonghyun Seong
Donghyun Seong
JSJang-Kyoo Shin
Jang-Kyoo Shin
CKChong-Min Kyung
Chong-Min Kyung
This paper presents a CMOS image sensor with the in-pixel aperture technique for single-chip 2-D and 3-D imaging. In conventional image sensors, the aperture is located at the camera lens. However, in the proposed image sensor, the aperture is integrated on the CMOS image sensor chip and is formed at a metal layer of the CMOS image sensor (CIS) process. A pixel array of the image sensor is composed of the W, R, B, and PA pixels (W pixel with integrated metal aperture) for extracting color and depth information. While the image of the W pixel becomes blurred with increasing distance from a focused object, the image of the PA pixel maintains the sharpness. Therefore, the depth image can be obtained using the depth from the defocus method. The size of the pixel, which is based on a four-transistor active pixel sensor with pinned photodiode, is $2.8 \,\,\mu {\mathrm{ m}} \times 2.8\,\,\mu \text{m}$ . A prototype of the proposed image sensor was fabricated using the 0.11- $\mu \text{m}$ CIS process and its performance was evaluated.

16 April 2019 in Sensors
Verified
Journal Article
Open access
PDF file
JLJimin Lee
Jimin Lee
BCByoung-Soo Choi
Byoung-Soo Choi
SKSang-Hwan Kim
Sang-Hwan Kim
JLJewon Lee
Jewon Lee
JLJunwoo Lee
Junwoo Lee
JSJang-Kyoo Shin
Jang-Kyoo Shin
This paper presents the effects of offset pixel aperture width on the performance of monochrome (MONO) CMOS image sensors (CISs) for a three-dimensional image sensor. Using a technique to integrate the offset pixel aperture (OPA) inside each pixel, the depth information can be acquired using a disparity from OPA patterns. The OPA is classified into two pattern types: Left-offset pixel aperture (LOPA) and right-offset pixel aperture (ROPA). These OPAs are divided into odd and even rows and integrated in a pixel array. To analyze the correlation between the OPA width and the sensor characteristics, experiments were conducted by configuring the test elements group (TEG) regions. The OPA width of the TEG region for the measurement varied in the range of 0.3–0.5 μm. As the aperture width decreased, the disparity of the image increased, while the sensitivity decreased. It is possible to acquire depth information by the disparity obtained from the proposed MONO CIS using the OPA technique without an external light source. Therefore, the proposed MONO CIS with OPA could easily be applied to miniaturized devices. The proposed MONO CIS was designed and manufactured using the 0.11 μm CIS process.

6 April 2019 in Sensors
Verified
Journal Article
Open access
PDF file
SKSang-Hwan Kim
Sang-Hwan Kim
BCByoung-Soo Choi
Byoung-Soo Choi
JLJimin Lee
Jimin Lee
JLJunwoo Lee
Junwoo Lee
JLJewon Lee
Jewon Lee
JSJang-Kyoo Shin
Jang-Kyoo Shin
In this paper, we propose an averaging pixel current adjustment technique for reducing fixed pattern noise (FPN) in the bolometer-type uncooled infrared image sensor. The averaging pixel current adjustment technique is composed of active pixel, reference pixel, and calibration circuit. Polysilicon resistors were used in each active pixel and reference pixel. Resistance deviation among active pixels integrated with the same resistance value cause FPN. The principle of the averaging pixel current adjustment technique for removing FPN is based on the subtraction of dark current of the active pixel from the dark current of the reference pixel. The subtracted current is converted into the voltage, which contains pixel calibration information. The calibration circuit is used to adjust the calibration current. After calibration, the nano-ampere current is output with small deviation. The proposed averaging pixel current adjustment technique is implemented by a chip composed of a pixel array, a calibration circuit, average current generators, and readout circuits. The chip was fabricated using a standard 0.35 μm CMOS process and its performance was evaluated.

20 October 2020 in Sensors and Materials
Verified
Journal Article
Open access
SKSang-Hwan Kim
Sang-Hwan Kim
JLJimin Lee
Jimin Lee
HKHyeunwoo Kwen
Hyeunwoo Kwen
JPJae-Hyoun Park
Jae-Hyoun Park
KLKyoung-Il Lee
Kyoung-Il Lee
JSJang-Kyoo Shin
Jang-Kyoo Shin

20 February 2017
Verified
Conference Paper
Closed access
PDF file
BCByoung-Soo Choi
Byoung-Soo Choi
MBMyunghan Bae
Myunghan Bae
SKSang-Hwan Kim
Sang-Hwan Kim
JLJimin Lee
Jimin Lee
COChang-Woo Oh
Chang-Woo Oh
JSJang-Kyoo Shin
Jang-Kyoo Shin
A 3dimensional (3D) imaging is an important area which can be applied to face detection, gesture recognition, and 3D reconstruction. In this paper, extraction of depth information for 3D imaging using pixel aperture technique is presented. An active pixel sensor (APS) with in-pixel aperture has been developed for this purpose. In the conventional camera systems using a complementary metal-oxide-semiconductor (CMOS) image sensor, an aperture is located behind the camera lens. However, in our proposed camera system, the aperture implemented by metal layer of CMOS process is located on the White (W) pixel which means a pixel without any color filter on top of the pixel. 4 types of pixels including Red (R), Green (G), Blue (B), and White (W) pixels were used for pixel aperture technique. The RGB pixels produce a defocused image with blur, while W pixels produce a focused image. The focused image is used as a reference image to extract the depth information for 3D imaging. This image can be compared with the defocused image from RGB pixels. Therefore, depth information can be extracted by comparing defocused image with focused image using the depth from defocus (DFD) method. Size of the pixel for 4-tr APS is 2.8 μm × 2.8 μm and the pixel structure was designed and simulated based on 0.11 μm CMOS image sensor (CIS) process. Optical performances of the pixel aperture technique were evaluated using optical simulation with finite-difference time-domain (FDTD) method and electrical performances were evaluated using TCAD.