A complementary metal oxide semiconductor (CMOS) image sensor (CIS), using offset pixel aperture (OPA) technique, was designed and fabricated using the 0.11-µm CIS process. In conventional cameras, an aperture is located on the camera lens. However, in a CIS camera using OPA technique, apertures are integrated as left-offset pixel apertures (LOPAs) and right-offset pixel apertures (ROPAs). A color pattern is built, comprising LOPA, blue, red, green, and ROPA pixels. The disparity information can be acquired from the LOPA and ROPA channels. Both disparity information and two-dimensional (2D) color information can be simultaneously acquired from the LOPA, blue, red, green, and ROPA channels. A geometric model of the OPA technique is constructed to estimate the disparity of the image, and the measurement results are compared with the estimated results. Depth extraction is thus achieved by a single CIS using the OPA technique, which can be easily adapted to commercial CIS cameras.
This paper presents a CMOS image sensor with the in-pixel aperture technique for single-chip 2-D and 3-D imaging. In conventional image sensors, the aperture is located at the camera lens. However, in the proposed image sensor, the aperture is integrated on the CMOS image sensor chip and is formed at a metal layer of the CMOS image sensor (CIS) process. A pixel array of the image sensor is composed of the W, R, B, and PA pixels (W pixel with integrated metal aperture) for extracting color and depth information. While the image of the W pixel becomes blurred with increasing distance from a focused object, the image of the PA pixel maintains the sharpness. Therefore, the depth image can be obtained using the depth from the defocus method. The size of the pixel, which is based on a four-transistor active pixel sensor with pinned photodiode, is $2.8 \,\,\mu {\mathrm{ m}} \times 2.8\,\,\mu \text{m}$ . A prototype of the proposed image sensor was fabricated using the 0.11- $\mu \text{m}$ CIS process and its performance was evaluated.
This paper presents the effects of offset pixel aperture width on the performance of monochrome (MONO) CMOS image sensors (CISs) for a three-dimensional image sensor. Using a technique to integrate the offset pixel aperture (OPA) inside each pixel, the depth information can be acquired using a disparity from OPA patterns. The OPA is classified into two pattern types: Left-offset pixel aperture (LOPA) and right-offset pixel aperture (ROPA). These OPAs are divided into odd and even rows and integrated in a pixel array. To analyze the correlation between the OPA width and the sensor characteristics, experiments were conducted by configuring the test elements group (TEG) regions. The OPA width of the TEG region for the measurement varied in the range of 0.3–0.5 μm. As the aperture width decreased, the disparity of the image increased, while the sensitivity decreased. It is possible to acquire depth information by the disparity obtained from the proposed MONO CIS using the OPA technique without an external light source. Therefore, the proposed MONO CIS with OPA could easily be applied to miniaturized devices. The proposed MONO CIS was designed and manufactured using the 0.11 μm CIS process.
In this paper, we propose an averaging pixel current adjustment technique for reducing fixed pattern noise (FPN) in the bolometer-type uncooled infrared image sensor. The averaging pixel current adjustment technique is composed of active pixel, reference pixel, and calibration circuit. Polysilicon resistors were used in each active pixel and reference pixel. Resistance deviation among active pixels integrated with the same resistance value cause FPN. The principle of the averaging pixel current adjustment technique for removing FPN is based on the subtraction of dark current of the active pixel from the dark current of the reference pixel. The subtracted current is converted into the voltage, which contains pixel calibration information. The calibration circuit is used to adjust the calibration current. After calibration, the nano-ampere current is output with small deviation. The proposed averaging pixel current adjustment technique is implemented by a chip composed of a pixel array, a calibration circuit, average current generators, and readout circuits. The chip was fabricated using a standard 0.35 μm CMOS process and its performance was evaluated.
A power-saving readout scheme for CMOS image sensors (CIS) that utilizes the image properties is presented. The proposed delta-readout (Δ-readout) scheme reads the signal difference between two pixels located next to each other. By effectively reducing the dynamic range of the signal, the readout ADC can reduce the number of decision cycles and save power consumption while maintaining the ADC performance at the level of a conventional ADC. The prototype QQVGA CIS with ten 10-bit SAR ADCs in a multi-column-parallel (MCP) configuration was fabricated in a 1P4M 0.18 μm CIS process with metal-insulator-metal (MIM) capacitors. The measurement results show the power-saving effect of 26% depending on the image patterns.
30 September 2014 in Journal of Sensor Science and Technology