The concentration of greenhouse gases (GHGs) in the atmosphere has been increasing since the beginning of the industrial revolution. Nitrous oxide (N₂O) is one of the mightiest GHGs, and agriculture is one of the main sources of N₂O emissions. In this paper, we reviewed the mechanisms triggering N₂O emissions and the role of agricultural practices in their mitigation. The amount of N₂O produced from the soil through the combined processes of nitrification and denitrification is profoundly influenced by temperature, moisture, carbon, nitrogen and oxygen contents. These factors can be manipulated to a significant extent through field management practices, influencing N₂O emission. The relationships between N₂O occurrence and factors regulating it are an important premise for devising mitigation strategies. Here, we evaluated various options in the literature and found that N₂O emissions can be effectively reduced by intervening on time and through the method of N supply (30–40%, with peaks up to 80%), tillage and irrigation practices (both in non-univocal way), use of amendments, such as biochar and lime (up to 80%), use of slow-release fertilizers and/or nitrification inhibitors (up to 50%), plant treatment with arbuscular mycorrhizal fungi (up to 75%), appropriate crop rotations and schemes (up to 50%), and integrated nutrient management (in a non-univocal way). In conclusion, acting on N supply (fertilizer type, dose, time, method, etc.) is the most straightforward way to achieve significant N₂O reductions without compromising crop yields. However, tuning the rest of crop management (tillage, irrigation, rotation, etc.) to principles of good agricultural practices is also advisable, as it can fetch significant N₂O abatement vs. the risk of unexpected rise, which can be incurred by unwary management.

Salinity stress (SS) is major abiotic stress that is seriously limiting crop production across the globe. The application of organic amendments (OA) mitigate the effects of salinity and improves soil health and crop production on a sustainable basis. However, limited studies are conducted to determine the impact of farmyard manure (FYM) and press mud (PM) on the performance of rice crop. Therefore, we performed this study to determine the impacts of FYM and PM on the growth, physiological and biochemical attributes, yield, and grain bio-fortification of rice crop under SS. The experiment was comprised of SS levels; control, 6 and 12 dS m⁻¹ SS and OA; control, FYM: 5%, press mud 5% and combination of FYM (5%) + PM (5%). Soil salinity imposed deleterious impacts on the growth, yield, and grain quality of rice, however, OA appreciably offset the deleterious impacts of SS and improved the growth, yield, and grain bio-fortification of rice crop. The combined application of FYM + PM improved the growth and yield of rice through an increase in chlorophyll contents, leaf water contents, anti-oxidant activities (ascorbate peroxidise: APX; catalase: CAT, peroxidise: POD and ascorbic acid: AsA), K⁺ accumulation and decrease in Na⁺/K⁺ ratio, electrolyte leakage, malondialdehyde (MDA), hydrogen peroxide (H₂O₂), Na⁺ accumulation. Moreover, the combined application of FYM + PM significantly improved the grain protein (5.84% and 12.90%), grain iron (40.95% and 42.37%), and grain zinc contents (36.81% and 50.93%) at 6 and 12 dS m⁻¹ SS. Therefore, this study suggested that the application of FYM and PM augmented the growth, yield, physiology, biochemistry, and grain bio-fortification of rice and proved to be a good practice for better rice production in salt-affected soils.

Due to limited conventional energy sources, there is a need to find substitute non-conventional sources of energy to meet the societal demands on a sustainable basis. Crude oil and edible oil remain major import items in Pakistan, the deficit of which can be compensated by using biomass, preferably inedible oilseeds. Therefore, the current study evaluated the role of sulfur (S) fertilization for improving yield (seed and oil) and biodiesel value of castor bean, a potential inedible crop with minimum input requirements. For this purpose, a combined approach of field experimentation and laboratory analysis was conducted to explore the potential of two castor bean cultivars (DS-30 and NIAB Gold) against four S supply rates, namely, 0, 20, 40, and 60 kg S ha^–1, in terms of growth, phenology, and yield parameters. Subsequently, the obtained seed samples were analyzed for biodiesel-related parameters in the Bio-analytical Chemistry lab, Punjab Bio-energy Institute, Faisalabad. The incremental S rates increased the seed yield for both cultivars, and the highest yield was recorded at 60 kg S ha^–1 for NIAB Gold. For NIAB Gold, the oil content increased by 7% with S fertilization at 60 kg ha^–1, and for DS-30, the oil content increased by 6% at 60 kg ha^–1. As with incremental S fertilization, the oil yield increased on a hectare basis, and the quantity of biodiesel produced also increased. Importantly, the tested quality parameters of biodiesel, except biodiesel viscosity, were in the ASTM standard range. Overall, it has been concluded that castor bean is a promising and sustainable option for producing biodiesel as it is non-competitive to food crops and requires little input.

Red soils are characterised by acidic pH and limitations in carbon, nitrogen, water, and soil structure. To overcome such limitations, improved soil aggregation is the key to improving the physical and chemical properties of soil. Applying organic amendments such as straw can lead to corresponding soil aggregation and stability changes. Therefore, we explored the short-term effects of rice straw amendment, either alone or in combination with biochar, on improving the carbon fractions, stability, and composition of soil aggregates in red soil with a history of vegetable planting. The study consisted of four treatments: control (no organic material, CK), biochar alone (5% homemade straw biochar, B), straw alone (12% rice straw, S), and biochar with straw (5% homemade straw biochar + 12% rice straw, BS). Our results showed that equal amounts of straw and biochar substantially reduced the number of mechanically stable aggregates (MSA), mean weight diameter (MWD), and geometric mean diameter (GMD) of the soil. BS treatment reduced >0.25 mm aggregate content (R_0.25), MWD and GMD by 24.06%, 56.81%, and 62.19%, respectively, compared with that of the control. The addition of straw greatly enhanced the water-stable macromolecular content and stability coefficient of the soil, but treatment B had no obvious effect. The S treatment had the greatest effect on R_0.25, MWD and GMD, increasing them by 143.94%, 246.67%, and 181.82%, respectively, compared with that of the control. Soil organic carbon (SOC) was significantly increased by straw addition and carbonisation treatment, and the effect of the BS treatment was the best, with an increase of 325.63% compared with that of the control. The organic carbon content in the aggregates of different particle sizes treated with different organic materials also increased significantly. In the soil reactive organic carbon fraction, applying biochar alone did not affect microbial biomass carbon (MBC), dissolved organic carbon (DOC), or easily oxidized organic carbon (EOC) but could increase the particulate organic carbon (POC) content. All the treatments with straw application significantly increased the MBC, DOC, EOC, and POC content, and the highest effect was obtained by applying both straw and biochar in an integrated form, i.e., the BS treatment. In conclusion, the co-application of biochar and straw sequestered more carbon and revamped soil C pools than either biochar or straw alone and could be a promising option for the sustainable use of red soils to ameliorate the aforementioned limitations associated with this soil type.

To ensure energy security and greenhouse gas emission, the world has decided to look for more sustainable and renewable energy sources. Biogas production from agricultural biomass is a fast growing market in the world. Suitable energy crops include maize, clover grass, alfalfa, sorghum, sudangrass, miscanthus and many others. Management considerations of energy crops such as harvesting time and nitrogen (N) application considerably influenced the biomass yield, quality of crop along with bio-methane production. Therefore, field study was conducted to determine the impact of harvesting times (HT) and nitrogen rates on the biomass yield of maize and production of bio-methane from it. The variable NR and HT, had a substantial influence on morphological, and compositional traits and bio-methane production. The N application at 200 kg ha-1 produced the taller plants, with maximum leaves, leaf area, biomass yield, protein contents, acid detergent fiber (ADF), neutral detergent fiber (NDF), and lignin contents. In addition to that higher nitrogen rate (200 kg ha-1) produced higher methane production however, it remained the same with 150 kg N ha-1. Harvesting at 65 DAS produced the maximum taller plants with maximum leaf area, biomass yield and had maximum ADF and NDF which negatively affected the specific methane yield. Moreover, harvesting at 65 DAS produced maximum methane yield (MP) due to higher biomass yield (BY). It is concluded that N application @ 150 kg ha-1 and harvesting at 65 DAS can be suitable for getting the higher bio-methane production under semi-arid conditions of Pakistan.

Camelina sativa (L.) Crantz is an emerging oil seed crop and research information on its response to different levels of phosphorous (P) fertilizer is lacking. The two years study was performed to investigate the response of C. sativa to various rates of P fertilizer. The experiments were laid out in Randomized Complete Block Design (RCBD) with factorial arrangement having four replications. The P was applied in soil at the rate of 0, 30, 40 and 60 kg ha-1 to two C. sativa accessions namely Canadian and Australian. Soil applied phosphorus rates had significant effects on the growth, yield and quality of C. sativa and two accessions were varied to each other. Australian accession performed better in terms of quality traits and Canadian was superior in terms of seed yield. An increase in P rate improved growth, yield and quality and 60 kg P ha-1 resulted in maximal crop growth rate (6.79), seed yield (1239 kg ha-1), total P uptake (0.67%) and oil contents (39.8%). The regression model estimated that each increment in P rate increased the seed yield by 11.5 and 11.2 kg ha-1 in Canadian and Australian accessions, respectively. Conclusively, increases in P rates (0 to 60 kg ha-1) impart a positive impact on C. sativa accessions and 60 kg P ha-1 was most effective to achieve optimum yield and profitability.