Tomi Koskinen

Mr. Tomi Koskinen

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2019 in RSC Advances
Verified
Journal Article
Open access
PDF file
JCJ. Coroa
J. Coroa
BFB. M. Morais Faustino
B. M. Morais Faustino
AMA. Marques
A. Marques
CBC. Bianchi
C. Bianchi
TKTomi Koskinen
Tomi Koskinen
IFIsabel Ferreira
Isabel Ferreira
Simultaneously transparent and flexible conductive materials are in demand to follow the current trend in flexible technology. The search for materials with compliant optoelectronic properties, while simultaneously retaining their electric conductivity at high strain deformation, comprises promising opportunities in modern nanotechnology. Copper iodide (CuI) is not only the most transparent and highly conductive p-type material, but its optimization has contributed to improved ZT values in planar thin-film thermoelectrics. In this work, the readiness of CuI thin films to transparent, flexible technology is evidenced. A maximum ZT value of 0.29 for single CuI thin films of ca. 300 nm in thickness is reported. Values of open-circuit voltage Voc, short circuit current Isc and power output of p–n thermoelectric modules of Gallium-doped zinc oxide (GZO) and CuI thin films deposited on a transparent flexible Kapton® (type CS) substrate are reported, and a prototype of a flexible transparent thermoelectric generator based on 17 p–n modules was constructed. Bending analysis of CuI thin films reveals interesting, distinct results when submitted to compression and tension analysis – a behaviour not seen in conventional semiconducting thin films under equivalent strain conditions. A plausible account for such diversity is also included.

11 September 2020 in Sensors
Verified
Journal Article
Open access
PDF file
TKTomi Koskinen
Tomi Koskinen
TJTaneli Juntunen
Taneli Juntunen
ITIlkka Tittonen
Ilkka Tittonen
Emergent applications in wearable electronics require inexpensive sensors suited to scalable manufacturing. This work demonstrates a large-area thermal sensor based on distributed thermocouple architecture and ink-based multilayer graphene film. The proposed device combines the exceptional mechanical properties of multilayer graphene nanocomposite with the reliability and passive sensing performance enabled by thermoelectrics. The Seebeck coefficient of the spray-deposited films revealed an inverse thickness dependence with the largest value of 44.7 μV K−1 at 78 nm, which makes thinner films preferable for sensor applications. Device performance was demonstrated by touch sensing and thermal distribution mapping-based shape detection. Sensor output voltage in the latter application was on the order of 300 μV with a signal-to-noise ratio (SNR) of 35, thus enabling accurate detection of objects of different shapes and sizes. The results imply that films based on multilayer graphene ink are highly suitable to thermoelectric sensing applications, while the ink phase enables facile integration into existing fabrication processes.

28 October 2019 in Nanoscale
Verified
Journal Article
Open access
PDF file
TJTaneli Juntunen
Taneli Juntunen
TKTomi Koskinen
Tomi Koskinen
VKVladislav Khayrudinov
Vladislav Khayrudinov
THTuomas Haggren
Tuomas Haggren
HJHua Jiang
Hua Jiang
ITIlkka Tittonen
Ilkka Tittonen
Semiconductor nanowire heterostructures have been shown to provide appealing properties for optoelectronics and solid-state energy harvesting by thermoelectrics. Among these nanoarchitectures, coaxial core–shell nanowires have been of primary interest due to their electrical functionality, as well as intriguing phonon localization effects in the surface-dominated regime predicted via atomic simulations. However, experimental studies on the thermophysical properties of III–V semiconductor core–shell nanowires remain scarce regardless of the ubiquitous nature of these compounds in solid-state applications. Here, we present thermal conductivity measurements of the arrays of GaAs nanowires coated with AlAs shells. We unveil a strong suppression in thermal transport facilitated by the AlAs shells, up to ∼60%, producing a non-monotonous dependence of thermal conductivity on the shell thickness. Such translation of the novel heat transport phenomena to macroscopic nanowire arrays paves the way for rational thermal design in nanoscale applications.

12 October 2022 in Nanotechnology
Verified
Journal Article
Open access
PDF file
TKTomi Koskinen
Tomi Koskinen
UVUlrika Volin
Ulrika Volin
CTCamilla Tossi
Camilla Tossi
RRRamesh Raju
Ramesh Raju
ITIlkka Tittonen
Ilkka Tittonen
Atomic layer deposited (ALD) transparent thermoelectric materials enable the introduction of energy harvesting and sensing devices onto surfaces of various shapes and sizes in imperceptible manner. Amongst these materials, ZnO has shown promising results in terms of both thermoelectric and optical characteristics. The thermoelectric performance of ZnO can be further optimized by introducing extrinsic doping, to the realization of which ALD provides excellent control. Here, we explore the effects of sandwiching of ZrO2 layers with ZnO on glass substrates. The room-temperature thermoelectric power factor is maximised at 116μW m−1 K−2 with samples containing a 2% nominal percentage of ZrO2. The addition of ZrO2 layers is further shown to reduce the thermal conductivity, resulting in a 20.2% decrease from the undoped ZnO at 2% doping. Our results contribute to increasing the understanding of the effects of Zr inclusion in structural properties and growth of ALD ZnO, as well as the thermal and thermoelectric properties of Zr-doped ZnO films in general.

11 April 2024 in ACS Applied Electronic Materials
Verified
Journal Article
Open access
TNTarmo Nieminen
Tarmo Nieminen
TKTomi Koskinen
Tomi Koskinen
VKVladimir V. Kornienko
Vladimir V. Kornienko
GRGlenn Ross
Glenn Ross
MPMervi Paulasto-Kröckel
Mervi Paulasto-Kröckel
Heat accumulation and self-heating have become key issues in microelectronics owing to the ever-decreasing size of components and the move toward three-dimensional structures. A significant challenge for solving these issues is thermally isolating materials, such as silicon dioxide (SiO2), which are commonly used in microelectronics. The silicon-on-insulator (SOI) structure is a great demonstrator of the limitations of SiO2 as the low thermal conductivity insulator prevents heat dissipation through the bottom of a device built on a SOI wafer. Replacing SiO2 with a more thermally conductive material could yield immediate results for improved heat dissipation of SOI structures. However, the introduction of alternate materials creates unknown interfaces, which can have a large impact on the overall thermal conductivity of the structure. In this work, we studied a direct bonded AlN-to-SOI wafer (AlN-SOI) by measuring the thermal conductivity of AlN and the thermal boundary conductance (TBC) of silicon (Si)/AlN and Si/SiO2/aluminum-oxygen-nitrogen (AlON)/AlN interfaces, the latter of which were formed during plasma-activated bonding. The results show that the AlN-SOI possesses superior thermal properties to those of a traditional SOI wafer, with the thermal conductivity of AlN measured at roughly 40 W m-1 K-1 and the TBC of both interfaces at roughly 100 MW m-2 K-1. These results show that AlN-SOI is a very promising structure for improving heat dissipation in future microelectronics.

3 July 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
TKTomi Koskinen
Tomi Koskinen
RRRamesh Raju
Ramesh Raju
ITI. Tittonen
I. Tittonen
CKC. Kauppinen
C. Kauppinen
Transparent thermoelectric materials enable the integration of sensing and energy harvesting devices on various surfaces such as windows and user interfaces. A key constraint for device performance in such applications is the available surface area from which the thermoelectric power should be harvested without compromising the optical properties. Here, we demonstrate atomic layer deposition (ALD) of aluminum doped zinc oxide (AZO), the most prominent n-type thermoelectric material, on grass-like alumina (GLA), a high-performance, low-cost antireflective coating. The conformal nature of the ALD process enables the AZO growth to closely follow the topography of the underlying GLA film, therefore providing an increased effective surface area compared to a reference AZO film grown directly on plain glass. The films grown on GLA show an improved electrical conductivity attributed to additional doping by the GLA. The effect is pronounced at lower AZO thicknesses, resulting in a 228% increase in the electrical conductivity and an 80% increase in the thermoelectric power factor of 32 nm thick films. Moreover, the GLA-AZO films partly inherit the antireflective behavior of the GLA film, thus showing improved optical transparency compared to the reference AZO film on glass. Our results promote transparent thermoelectric devices with improved transparency and thermoelectric performance.