Traditional freshwater sources have been over-abstracted in the worldwide crisis of water scarcity. Effluents have extremely high amounts of Zn2+ and Pb2+, according to an investigation of wastewater samples taken from several industrial zones. However, these heavy metals are among the most harmful to both humans and wildlife that are currently known. Streptomyces sp. is utilized in this study as a biosorbent to biosorb Zn2+ and Pb2+ from single and binary aqueous solutions. Several factors, such as biomass concentration (0.25–4 g), metal solution concentration (5–50 mg L−1), solution pH (2–5), and contact time were standardized. Streptomyces sp. biomass was able to extract 93% Pb2+ and 91% Zn2+ from a single and 95% Pb2+ and 97% Zn2+ from a binary metal aqueous solution containing 25 mg L−1 and pH 4. The highest adsorption capacity in both single and binary sorption experiments was determined to be shared by Zn2+ and Pb2+. The biosorbent’s metal adsorption increased from 0.48 to 4.56 mg g−1 for Pb2+ and from 0.21 mg g−1 to 4.65 mg g−1 for Zn2+ when the metals were present singly, and from 0.44 to 4.18 mg g−1 for Pb2+ and from 0.41 mg g−1 to 5.67 mg g−1 for Zn2+ when the metals were present in binary form. The amount of metal ions was raised from 5 to 50 mg L−1. Correlation coefficient (R2) values indicate that the adsorption pattern for Zn2+ and Pb2+ followed Freundlich isotherm R2 > 0.9543 for single and 0.9582 for binary sorption system. In order to remove Zn2+ and Pb2+ from an aqueous solution, Streptomyces sp. is a potential and different source of adsorbents.
Dyes are a significant group of organic contaminants known to negatively affect both humans and aquatic environments. In the textile industry, interest in agricultural-based adsorbents has increased, particularly around adsorption. In this study, methylene blue was eliminated from an aqueous solution using a walnut (Juglans regia) shell. These materials are widely available and inexpensive, and its cost can be a major factor in wastewater treatment batch experiments. Response surface methodology (RSM) is based on a face-centred central composite design, used to identify the independent variable. With the use of RSM, the biomass of J. regia shells was assessed for its capacity to absorb dyes from aqueous solutions, including methylene blue. Maximum methylene blue dye removal percentages (97.70%) were obtained with a 30 mg/L concentration of methylene blue dye, 1.5 gm of biomass, an initial pH of 6, and a contact duration of 60 min at 25 °C. Additionally, particles were absorbed onto the J. regia shell’s surface throughout the biosorption process, according to scan electron microscopy. Functional groups were discovered in the Fourier Transform Infrared Spectroscopy spectra, which are crucial for binding during the biosorption of methylene blue. It has been demonstrated that J. regia shell biomass performs well as a biosorbent in the removal of methylene blue from wastewater effluents. It is also a promising, biodegradable, environmentally friendly, economical, and cost-effective biosorbent.
28 July 2015 in International Journal of Environmental Science and Technology
In the present study, electro-coagulation (EC) with stainless steel (SS) electrodes has been used as a pretreatment process before the reverse osmosis (RO) for the biologically treated distillery spent wash. The optimized operating parameters (pH, time, current, and electrode distance) for the EC process were obtained from the previous study. EC treated wastewater was further used as a feed for the RO system. RO membrane system operating parameters (pH, temperature, and trans-membrane pressure) were optimized by employing response surface methodology. Optimized conditions for the RO process were found to be: pH (pHo): 6.12; temperature (T): 20°C and trans-membrane pressure (TMP): 45.7 bar. The combined (EC-RO) process showed 98%, 99.2%, and 98.5% of COD, color, and TDS removal, respectively, with permeate flux of 40.5 L/m2/h (EC-RO). Experimental results indicated that EC followed by RO could be used as an additional step for biologically treated spent wash treatment to improve the treated effluent quality and membrane life. Results also revealed that the techno-economic performance of combined (EC-RO) treatment in terms of total annual water production is more efficient and economical than RO alone. GRAPHICAL ABSTRACT
In this paper, a thorough investigation has been done to evaluate the effects of different pollutants on membrane performance by autopsy. Autopsy was performed on fresh and fouled reverse osmosis (RO) membrane elements from a distillery spent wash treatment plant by different analyses, such as field emission scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy and X-ray diffraction, to identify the cause of poor performance of an RO plant. Results obtained from the analysis of membranes indicate that a mixture of colloids and organic matters (polysaccharides and amines) along with the presence of multivalent ions (Ca, Mg, Fe and SO4) causes membrane fouling, which in turn affects membrane performance. Possible measures to improve treated effluent quality and mitigate fouling have been suggested for this particular case study.