Integrating thermochemical–biochemical methods overcomes the single-path limits for bioenergy production. This synergy lowers costs and enhances energy sustainability, highlighting waste-to-energy's vital role in the circular economy transition.
Traditional freshwater sources have been over-abstracted in the worldwide crisis of water scarcity. Effluents have extremely high amounts of Zn2+ and Pb2+, according to an investigation of wastewater samples taken from several industrial zones. However, these heavy metals are among the most harmful to both humans and wildlife that are currently known. Streptomyces sp. is utilized in this study as a biosorbent to biosorb Zn2+ and Pb2+ from single and binary aqueous solutions. Several factors, such as biomass concentration (0.25–4 g), metal solution concentration (5–50 mg L−1), solution pH (2–5), and contact time were standardized. Streptomyces sp. biomass was able to extract 93% Pb2+ and 91% Zn2+ from a single and 95% Pb2+ and 97% Zn2+ from a binary metal aqueous solution containing 25 mg L−1 and pH 4. The highest adsorption capacity in both single and binary sorption experiments was determined to be shared by Zn2+ and Pb2+. The biosorbent’s metal adsorption increased from 0.48 to 4.56 mg g−1 for Pb2+ and from 0.21 mg g−1 to 4.65 mg g−1 for Zn2+ when the metals were present singly, and from 0.44 to 4.18 mg g−1 for Pb2+ and from 0.41 mg g−1 to 5.67 mg g−1 for Zn2+ when the metals were present in binary form. The amount of metal ions was raised from 5 to 50 mg L−1. Correlation coefficient (R2) values indicate that the adsorption pattern for Zn2+ and Pb2+ followed Freundlich isotherm R2 > 0.9543 for single and 0.9582 for binary sorption system. In order to remove Zn2+ and Pb2+ from an aqueous solution, Streptomyces sp. is a potential and different source of adsorbents.
Dyes are a significant group of organic contaminants known to negatively affect both humans and aquatic environments. In the textile industry, interest in agricultural-based adsorbents has increased, particularly around adsorption. In this study, methylene blue was eliminated from an aqueous solution using a walnut (Juglans regia) shell. These materials are widely available and inexpensive, and its cost can be a major factor in wastewater treatment batch experiments. Response surface methodology (RSM) is based on a face-centred central composite design, used to identify the independent variable. With the use of RSM, the biomass of J. regia shells was assessed for its capacity to absorb dyes from aqueous solutions, including methylene blue. Maximum methylene blue dye removal percentages (97.70%) were obtained with a 30 mg/L concentration of methylene blue dye, 1.5 gm of biomass, an initial pH of 6, and a contact duration of 60 min at 25 °C. Additionally, particles were absorbed onto the J. regia shell’s surface throughout the biosorption process, according to scan electron microscopy. Functional groups were discovered in the Fourier Transform Infrared Spectroscopy spectra, which are crucial for binding during the biosorption of methylene blue. It has been demonstrated that J. regia shell biomass performs well as a biosorbent in the removal of methylene blue from wastewater effluents. It is also a promising, biodegradable, environmentally friendly, economical, and cost-effective biosorbent.