Photoelectrochemical water splitting is a promising pathway for solar-driven hydrogen production with a low environmental footprint. The utilization of solar concentrators to supply such water splitting devices with concentrated solar irradiation offers great potential to enhance the economic viability of water splitting at “sunny” site locations. In this work, we defined a set of functional requirements for solar concentrators to assess their suitability to power such water splitting devices, taking into account concentrator optical performance, device coupling efficiency, perceived system complexity, as well as technological costs and risks. We identified, classified and compared a broad range of existing solar concentrator design concepts. Our geometrical analysis, performed on a yearly basis with a one-minute time step, shows that two-axis tracking concentrators with water splitting devices positioned parallel to the optical aperture plane exhibit the highest potential, given the initial conditions applied for the device tilt constraints. Demanding an angle of at least 20° between horizontal and the front side of the water splitting device, allows the device to be operational for 97% of the daylight time in Seville, Spain. The relative loss with respect to the available direct normal irradiance is estimated to 6%. Results moderately depend on the location of application, but generally confirm that the consideration of tilt angle constraints is essential for a comprehensive performance assessment of photoelectrochemical water splitting driven by concentrated sunlight.
16 July 2013 in Journal of Solar Energy Engineering
This paper describes a transient thermography method to measure the heat loss of parabolic trough receivers and separate their heat loss mechanisms. This method is complementary to existing stationary techniques, which use either energy balances or glass envelope temperature measurements to derive overall heat losses. It is shown that the receiver heat loss can be calculated by applying a thermal excitation on the absorber tube and measuring both absorber tube and glass envelope temperature signals. Additionally, the emittance of the absorber selective coating and the vacuum quality of the annulus can be derived. The benefits and the limits of the transient method are presented and compared to the established stationary method based on glass envelope temperature measurements. Simulation studies and first validation experiments are described. A simulation based uncertainty analysis indicates that an uncertainty level of approximately 5% could be achieved on heat loss measurements for the transient method introduced in this paper, whereas for a conventional stationary field measurement technique, the uncertainty is estimated to 17–19%.
11 December 2023 in Solar Energy Materials and Solar Cells