Observation of the greenhouse effect prompts the consideration of every possibility of reducing anthropogenic carbon dioxide emissions. One of the key methods that has been the subject of much research is Carbon Dioxide Capture and Storage. The purpose of this study was to investigate the main technologies of CO₂ capture, separation, and dehydration as well as methods of its transport and methodology of selecting a suitable geological storage site. An installation of dehydration and compression of carbon dioxide captured after the post-combustion was designed at a temperature of 35 °C, a pressure of 1.51 bar, and a mass flow rate of 2.449 million tons/year, assuming that the geological storage site is located at 30 km from the capture place. For the dehydration process, a multistage compression and cooling system were applied, combined with a triethylene glycol (TEG) dehydration unit. The mass flow rate of TEG was selected as 0.5 kg/s. H₂O out of the TEG unit was 26.6 ppm. The amount of energy required to compress the gas was minimized by adopting a maximum post-compression gas temperature of 95 °C for each cycle, thereby reducing plant operating costs. The total power demand was 7047 kW, 15,990 kW, and 24,471 kW, and the total received heat input was 13,880.76 kW, 31,620.07 kW, and 47,035.66 kW for 25%, 60%, and 100% plant load, respectively. The use of more compressors reduces the gas temperature downstream through successive compression stages. It also decreases the total amount of energy required to power the entire plant and the amount of heat that must be collected during the gas stream cooling process. The integration of CO₂ compression and cooling system to recover heat and increase the efficiency of power units should be considered.

In the field of CO₂ capture and sequestration, ensuring the safety of pipeline infrastructure is paramount to successful climate change mitigation efforts. This study investigates the dynamics of CO₂ dispersion from pipeline systems, assessing not only the transport process but also the physical properties and associated hazards. Advanced simulation techniques are used to model how different states of CO₂ (gas, liquid, and supercritical) and varying pipeline characteristics—such as perforation sizes, flow rates, and orientations—affect the dispersion patterns in the event of a leak. Simulations cover a range of atmospheric conditions, emphasizing the role of atmospheric stability and wind speed in shaping dispersion and defining potential impact zones. An analysis of historical pipeline accidents is included to inform risk management strategies. The results show that the orientation of the pipeline has a significant effect on dispersion, with downward leaks causing the largest impact zones, particularly under supercritical conditions. The results highlight the need for adaptive safety strategies that take into account real-time CO₂ transport conditions and localized environmental data. By integrating these factors, the study recommends refining safety protocols and emergency response strategies to improve pipeline resilience and public safety against potential leaks. Key findings include the quantification of the relationship between leak parameters and dispersion areas, providing a valuable framework for future safety improvements.

Oil & Gas Science and Technology - Revue d'IFP Energies nouvelles