This paper presents two complementary methods: an approach to compute a network data-set for indoor space of a building by using its two-dimensional (2D) floor plans and limited semantic information, combined with an optimal crowd evacuation method. The approach includes three steps: (1) generate critical points in the space, (2) connect neighbour points to build up the network, and then (3) run the optimal algorithm for optimal crowd evacuation from a room to the exit gates of the building. Triangulated Irregular Network (TIN) is used in the first two steps. The optimal evacuation crowd is not based on the nearest evacuation gate for a person but relies on optimal sorting of the waiting lists at each gate of the room to be evacuated. As an example case, a rectangular room with 52 persons with two gates is evacuated in 102 elementary interval times (one interval corresponds to the time for one step for normal velocity walking), whereas it would have been evacuated in not less than 167 elementary steps. The procedure for generating the customized network involves the use of 2D floor plans of a building and some common Geographic Information System (GIS) functions. This method combined with the optimal sorting lists will be helpful for guiding crowd evacuation during any emergency.

Construction sites are susceptible to damage due to the occurrence of natural and technological hazard events such as fire and thermal flux. Therefore, project planners must adopt innovative approaches for evacuating construction sites seamlessly. This research aims to develop a model to find the least-risk paths for evacuating sites in order to diminish losses, injuries, and fatalities. The model consists of two main processes. The first is the generation of an optimal site layout that aims to minimize the total risk using a genetic algorithm. The second process is running Dijkstra’s algorithm to find the shortest safe path from any position on the construction site to the safe places. Spatial analysis tools are exploited in this research to generate the spatial risk maps and implement the least-cost path analysis. The model is implemented in a case study composed of numerous facilities. The results revealed that the proposed model is able to generate paths through least-risk zones, which will minimize the victims in cases of emergencies.

Assessing urban service locations is a key issue within city planning, integral to promoting the well-being of citizens, and ensuring effective urban development. However, many current approaches emphasize spatial analysis focused solely on physical attributes, neglecting the equally vital social dimensions essential for enhancing inhabitants’ comfort and quality of life. When social factors are considered, they tend to operate at smaller scales. This paper addresses this gap by prioritizing integrating social factors alongside spatial analysis at the community level. By employing space syntax theory, this study investigates urban service suitability in Hajjah, a Palestinian urban community, presenting a novel approach in the literature. The research identifies good spots for essential governmental facilities like health clinics and fire stations using axial map analysis. It also suggests reallocation for some schools. Additionally, it shows ways to improve the placement of community amenities, finding ideal park locations but suboptimal mosque placements. Commercial services also exhibit areas for enhancement including gas stations and shops. The insights from this research can offer policymakers and planners insights to create more efficient, equitable, and accessible cities. The research approach incorporates social behavior dynamics into spatial analysis, promoting inclusive urban planning.

Keywords: Land Surveying, UAV, Photogrammetry, Point Cloud, 3D Model The use of Unmanned Aerial Vehicles (UAVs) for surveying is now widespread and operational for several applications – quarry monitoring, archeological site surveys, forest management and 3D modeling for buildings, for instance. UAV is increasingly used by land surveyors especially for those kinds of projects. It is still ambiguous whether UAV can be applicable for smaller sites and property division. Therefore, the objective of this research is to extract a vectorized plan utilizing a UAV for a small site and investigate the possibility of an official land surveyor exploiting and certificating it. To do that, two plans were created, one using a UAV and another utilizing classical land surveyor instruments (Total Station). A comparison was conducted between the two plans to evaluate the accuracy of the UAV technique compared to the classical one. Moreover, other parameters were also considered such as execution time and the surface covered. The main problems associated with using a UAV are the level of precision and the visualization of the whole area. The results indicated that the precision is quite satisfactory with a maximum error of 1.0 cm on ground control points, and 4 cm for the rest of the model. On the other hand, the results showed that it is not possible to represent the whole area of interest utilizing a UAV, due to vegetation.

Since the advent of Computer-Aided Design (CAD) and Geographical Information System (GIS) tools, project participants have been increasingly leveraging these tools throughout the different phases of a civil infrastructure project. In recent years the number of GIS software that provides tools to enable the integration of Building information in geo context has risen sharply. More and more GIS software are added tools for this purposes and other software projects are regularly extending these tools. However, each software has its different strength and weakness and its purpose of use. This paper provides a thorough review to investigate the software capabilities and clarify its purpose. For this study, Autodesk Revit 2012 i.e. BIM editor software was used to create BIMs. In the first step, three building models were created, the resulted models were converted to BIM format and then the software was used to integrate it. For the evaluation of the software, general characteristics was studied such as the user interface, what formats are supported (import/export), and the way building information are imported.