A practical realization of a diode pumped actively Q-switched Er3+-doped fluoride fiber laser operating near 2.78 m is reported. For the repetition rate of 100 Hz stable 26 ns pulses with an energy of 330 J and peak power of 12.7 kW are demonstrated. The laser performance is tested against variations in pump power, repetition rate and active fiber length.
A diode-pumped Q-switched Er3+:ZBLAN double-clad, single-transverse mode fiber laser is practically realized. The Q-switched laser characteristics as a function of pump power, repetition rate, and fiber length are experimentally investigated. The results obtained show that the Q-switched operation with 46 µJ pulse energy, 56 ns long pulses, and 0.821 kW peak power is achieved at a pulse repetition rate of 10 kHz. To the best of our knowledge, this is the highest-ever demonstrated peak power emitted from an actively Q-switched, single-transverse mode Er3+:ZBLAN fiber laser operating near 2.8 µm.
While lasers are widely used across various industries, including woodworking, few studies to date have addressed the issue of cutting fresh wood. In the present investigation, wood stemming from fresh tree branches was cut at different laser powers and beam travel speeds. A fiber laser and a CO2 laser were used for the research. The cellular structures of the cut surfaces were examined, with some of them found to be covered with a layer of compacted, charred cells. This may be a favorable phenomenon, preventing the invasion of pathogens via the wounds caused by laser beam branch cutting in nurseries, plantations, and orchards.
11 September 2023 in Journal of Lightwave Technology
A laboratory realization of an actively Q-switched Dy 3+ -doped fluoride fiber laser operating near 3.0 μm is reported. Two laser cavities were realized: one based on 1000 ppm Dy 3+ :ZBLAN fiber and one on 2000 ppm Dy 3+ :ZBLAN fiber. With the laser cavity based on 1000 ppm Dy 3+ :ZBLAN fiber a record high peak power of 200 W was achieved with 17 μJ pulse energy and 84.5 ns pulse duration. Moreover, a record short pulse duration of 74 ns was achieved using Q-switched laser cavity composed of 2000 ppm Dy 3+ :ZBLAN fiber.
A realisation of a Q-switched Tm3+-doped fibre laser operating at 1.96 μm wavelength is reported. The Tm3+-doped fibre was fabricated using a novel multi-ring modified chemical vapour deposition-chelate doping technique (MCVD-CDT) technology. The developed laser emits pulses at a repetition rate of 3 kHz with an energy of 84 μJ and a duration of 272 ns, which corresponds to a peak power of 304 W. The experimental results confirm that the fabricated Tm3+-doped multi-ring, large mode area fibre is a promising candidate for developing high-energy Q-switched lasers operating near 2 µm wavelength.