Unfrozen water content significantly affects the thermal‐hydro‐mechanical characteristics of frozen soil. Currently, theoretical explanations for the presence of unfrozen water include capillary action, surface effects, adsorption forces, and the electrical double layer. However, the relationships between unfrozen water and these actions are not well explained, except for capillary forces. In addition, although frost heave experiments indicate that the electrical double‐layer solution on a clay particle contains the main portion of unfrozen water, the electrical double‐layer theory which produces a cation solution has not previously been used to calculate unfrozen water content. In this paper, it is assumed that the residual unfrozen water at very low temperatures (below −18°C) is held within the adsorption‐layer solution and that the remaining unfrozen water within the influence of surface effects is the cationic solution in the diffuse layer. Based on these assumptions, a theoretical model of unfrozen water is established with independent variables of temperature, specific surface area, and electrical double‐layer parameters. While the input parameters of the theoretical model are numerous and difficult to obtain, the theoretical model is simplified as a parametric model. Results of the parametric model are strongly consistent with experimental data within a certain temperature range, supporting the hypothetical conditions. The similarity in the underlying mathematical structure of the derived theoretical and parametric models to current semi‐empirical models further suggests that the surface effects of clay are the main causes of unfrozen water in frozen soil.
Fish-lighting complementary photovoltaic power station organically combines aquaculture and renewable energy. In this study we aimed to develop a solar photovoltaic that is not confined to land. We used a shade net to simulate photovoltaic panels, and studied the effects of different proportions of photovoltaic panels on water and fish. The results showed that the average light intensity of the unshaded area and the shaded area were 16,661.7 Lux and 2437.0 Lux. The average light intensity of the shaded area was 85.4% lower than that of the unshaded area. The effective range of the shaded area for the light intensity of the water layer was 0 cm~30 cm. The temperature and pH in the water body showed a linear decreasing trend with the increase of the photovoltaic deployment ratio, and the dissolved oxygen showed an inverted “U”-shaped change characteristic, but this effect was limited. When the photovoltaic deployment ratio was 25% to 75%, the dissolved oxygen in the water body increases by an average of 2.37% compared to the unshaded area. The appropriate proportion of photovoltaic deployment did not affect the dissolved oxygen content in the water body. When the photovoltaic deployment ratio reached 75%, the number of algae species and algae biomass was the largest, and the fish production was the highest at 8094.6 kg·acre−1, which is an increase of 166.2 kg·acre−1 compared to the average yield in unshaded areas. Therefore, photovoltaic layout will not affect the growth of fish, and the proportion of 75% is the best layout choice.
Solar photovoltaics (PV) has advanced at an unprecedented rate and the global cumulative installed PV capacity is growing exponentially. However, the ability to forecast PV power remains a key technical challenge due to the variability and uncertainty of solar irradiance resulting from the changes of clouds. Ground-based remote sensing with high temporal and spatial resolution may have potential for solar irradiation forecasting, especially under cloudy conditions. To this end, we established two ultra-short-term forecasting models of global horizonal irradiance (GHI) using Ternary Linear Regression (TLR) and Back Propagation Neural Network (BPN), respectively, based on the observation of a ground-based sky imager (TSI-880, Total Sky Imager) and a radiometer at a PV plant in Dunhuang, China. Sky images taken every 1 min (minute) were processed to determine the distribution of clouds with different optical depths (thick, thin) for generating a two-dimensional cloud map. To obtain the forecasted cloud map, the Particle Image Velocity (PIV) method was applied to the two consecutive images and the cloud map was advected to the future. Further, different types of cloud fraction combined with clear sky index derived from the GHI of clear sky conditions were used as the inputs of the two forecasting models. Limited validation on 4 partly cloudy days showed that the average relative root mean square error (rRMSE) of the 4 days ranged from 5% to 36% based on the TLR model and ranged from 12% to 32% based on the BPN model. The forecasting performance of the BPN model was better than the TLR model and the forecasting errors increased with the increase in lead time.
The accurate prediction of surface solar irradiance is of great significance for the generation of photovoltaic power. Surface solar irradiance is affected by many random mutation factors, which means that there are great challenges faced in short-term prediction. In Northwest China, there are abundant solar energy resources and large desert areas, which have broad prospects for the development of photovoltaic (PV) systems. For the desert areas in Northwest China, where meteorological stations are scarce, satellite remote sensing data are extremely precious exploration data. In this paper, we present a model using FY-4A satellite images to forecast (up to 15–180 min ahead) global horizontal solar irradiance (GHI), at a 15 min temporal resolution in desert areas under different sky conditions, and compare it with the persistence model (SP). The spatial resolution of the FY-4A satellite images we used was 1 km × 1 km. Particle image velocimetry (PIV) was used to derive the cloud motion vector (CMV) field from the satellite cloud images. The accuracy of the forecast model was evaluated by the ground observed GHI data. The results showed that the normalized root mean square error (nRMSE) ranged from 18.9% to 21.6% and the normalized mean bias error (nMBE) ranged from 3.2% to 4.9% for time horizons from 15 to 180 min under all sky conditions. Compared with the SP model, the nRMSE value was reduced by about 6%, 8%, and 14% with the time horizons of 60, 120, and 180 min, respectively.
With the rapid deployment of utility-scale photovoltaic (PV) plants, the impact of PV plants on the environment is a new concern of the scientific and social communities. The exchange of sensible and latent heat energy and mass between land and air in PV plants is crucial to understanding its impact. It is known that the near surface turbulence characteristics rule the exchange. Therefore, it is essential for understanding the impact to study the characteristics of near surface turbulence. However, it is not well recognized. Turbulent fluxes and strength characteristics for the PV plant and the adjacent reference site in the Xinjiang Gobi area were investigated in this study. Various surface layer parameters including friction velocity, stability parameter, momentum flux, and turbulent flux were calculated using eddy correlation system. Results indicate that compared to the reference site, near the surface boundary layer was more unstable during the daytime due to the stronger convection heating, while it was more stable at night in the PV plant. In the PV plant, was weakened and was strengthened during the daytime, and and were all weakened at night, while was strengthened across the whole day. The significant difference between and in the PV plant indicated that the horizontally turbulence strengths were affected by the plant layout. The turbulent kinetic energy of the PV plant was lower than the reference site and the momentum in the PV plant was higher than the reference site, especially during the daytime. Compared to the reference site, the PV plant had a higher sensible heat flux and less latent heat flux. The turbulent components of wind followed the 1/3 power law in the unstable conditions and stable conditions in the PV plant and the reference site.
The local climate effects of utility-scale photovoltaic (PV) plants have also attracted more and more attention with the rapid development of PV industry. Turbulent fluxes and intensity characteristics for the PV plant and the adjacent reference site are investigated in the gobi area in Wujianqu in Xinjiang. Results indicate that near surface boundary layer is more unstable during the daytime while is more stable at the night in the PV plant than the reference site. The average roughness is 0.089m and 0.041m for the PV plant and the reference site respectively. The turbulence intensity in the vertical direction (I_w) of the PV plant is higher than the reference site especially during the daytime. The turbulent kinetic energy of the PV plant during the daytime is lower than the reference site.The momentum in the PV plant is higher than the reference site, especially during the daytime. Compared to the reference site, the PV plant has higher sensible heat flux and less latent heat flux. Site specific turbulent intensity relationships were developed for the PV plant and the reference site by analyzing wind components as a function of stability parameter (z/L). The turbulent components of wind followed 1/3 power law in the unstable conditions and stable conditions in the PV plant and the reference site.