Aiming at the problems of large excitation loss and low power generation efficiency of silicon rectifier generators and the unstable output voltage of permanent magnet (PM) generators, a hybrid excitation generator (HEG) with suspended brushless claw pole electrical excitation rotor (EER) and combined magnetic pole PM rotor is proposed in the present work. With only one fractional slot winding stator, the generator adopts PM field as the main magnetic field and electrical excitation field as the auxiliary magnetic field, which not only retains the advantages of high efficiency of PM generators but also effectively reduces excitation consumption. The main structure parameters and the design method were analyzed, and a simulation analysis of no-load magnetic field distribution and flux regulation ability was carried out using finite element software to verify the rationality of the hybrid excitation parallel magnetic circuit design. Moreover, the no-load, load, regulation, and voltage regulation characteristics of the designed generator were tested, and the results show that the designed generator has a wide range of voltage regulation, which can ensure stable output voltage under variable speed and load conditions.

Due to the increasing energy crisis and environmental pollution, the development of drive motors for new energy vehicles (NEVs) has become the focus of popular attention. To improve the sine of the air-gap flux density and flux regulation capacity of drive motors, a new hybrid excitation synchronous motor (HESM) has been proposed. The HESM adopts a salient pole rotor with built-in dual-V permanent magnets (PMs), non-arc pole shoes and excitation windings. The fundamental topology, operating principle and analytical model for a magnetic field are presented. In the analytical model, the rotor magnetomotive force (MMF) is derived based on the minimum reluctance principle, and the permeance function considering a non-uniform air-gap is calculated using the magnetic equivalent circuit (MEC) method. Besides, the electromagnetic performance including the air-gap magnetic field and flux regulation capacity is analyzed by the finite element method (FEM). The simulation results of the air-gap magnetic field are consistent with the analytical results. The experiment and simulation results of the performance show that the flux waveform is sinusoidal-shaped and the air-gap flux can be adjusted effectively by changing the excitation current. This study provides design methods and theoretical analysis references for this type of HESM.

With the increasing energy shortages and environmental degradation, electric logistics vehicle (ELVs) with energy conservation and environmental protection has become a research hotspot. The design of machine is the key to develop ELVs. Magnetic field analysis is the most critical issue since its accuracy affects the calculation of motor torque, loss, and other characteristics. To provide a calculation method for the field and performance analysis of the machine for ELVs, this paper presents an analytical model of air-gap field for hybrid excitation and interior permanent magnet machine. In the proposed model, it is taken into account for the shape of the stator and rotor teeth. The flux density on the rotor side is derived by equivalent magnetic circuit (EMC) with leakage magnetic flux. Taking the calculated flux density as one of the second boundary conditions, the air-gap field distribution is calculated by magnetic potential model with the eccentricity of the rotor. To verify the analytical method, we adopted the finite element method. The simulation results of the air-gap flux, back electromotive force, and cogging torque are in good agreement with the analytical results. Besides, applying the analytical model, the machine can be optimized for obtaining the optimal air-gap flux density distribution. The hybrid excitation machine with salient pole and interior magnets can provide a good flux density waveform. The study offers a helpful analytical method for design and optimization of the type of machine for ELVs.

Aiming at the problem of uncontrollable magnetic field of permanent magnet generators, a new hybrid excitation generator (HEG) with parallel magnetic circuit is proposed. The HEG consists of combined permanent magnet rotor (PMR) and brushless electric excitation rotor (EER). The PMR has surface-mounted and embedded magnets. The PMR provides the main air gap field, and the brushless EER is used to adjust the air gap field. The operating principle and electromagnetic design scheme of the proposed generator are given in detail. Besides, the matching with two different types of rotors and the flux regulation characteristics is analyzed by using the finite element method. Finally, the output performance of the proposed generator including no-load and load characteristics and output voltage are tested. The results show that the two different types of rotors can be matched efficiently and operated reliably. The internal magnetic flux is easy to adjust in both directions, and the proposed HEG can output stable voltage in the range of wide speed and load.

A new type of brushless reverse claw-pole electrically excited generator is proposed for the problems of the low sine degree of the induced electromotive force waveform and the high harmonic content of the output voltage of the conventional electrically excited claw-pole generator. The design uses the equivalent magnetic network method to establish the equivalent magnetic circuit model of the motor and determines the equation for calculating the magnetoresistance of the isosceles trapezoidal variable section claw-pole structure. It derives the mathematical model of the no-load induced electric potential of the generator and completes to optimize the motor parameters with the no-load induced electric potential as the target. This study shows that the brushless reverse claw-pole electrically excited generator has the advantages of uniform magnetic field distribution, high harmonic fundamental amplitude of induced electromotive force and low harmonic content. It can better meet the application requirements compared with the conventional electrically excited claw-pole generator.