In this paper, a broadband double-ridge horn antenna (DRHA) covering 5G millimeter-wave (mm-wave) band is proposed, which maintains stable radiation pattern and gain in the entire band. By redesigning the transition between coaxial and waveguide, there is no splitting or deterioration in the axis pattern throughout the entire 18–54 GHz frequency band, and the VSWRs are all below 2. Meanwhile, by replacing the H-Side wall of the antenna with metal grid, the variation on 3 dB beamwidth of the radiation pattern also become more stable against frequencies. In order to fabricate the prototype successfully, the method of block processing and assembly is adopted, which can ensure high precision machining and make the assembly simple and easy to operate. Prototype measurement results show that the VSWR of the antenna is in well agreement with the simulation ones, while the gain is stable as well as no pattern splitting in the entire frequency band can be observed. It will find potential applications in 5G mm-wave frequency band, especially in the field of antenna measurement system as a standard calibration antenna or a probe antenna.
A filtering slot antenna with a simple structure combination using characteristic mode analysis (CMA) is proposed. To realize filtering characteristics, characteristic magnetic currents of line and ring slots are analyzed and designed. Then, the folding-line slot and double-ring slot are selected to realize radiation null separately and combined to construct the basic slot antenna. By properly exciting the selected characteristic modes, a wide filtering bandwidth and a stable gain are obtained. To validate the design process, a prototype antenna with a finite ground plane of about 1.1 λ × 1.1 λ is designed and fabricated. Simulated and measured results agree well, which both show a sharping roll rate in the lower and higher frequency and a flat gain realization in the pass band. The filtering bandwidth is 32.7%, the out-of-band suppression level at the higher frequency is over 20 dB, and the gain in the working frequency varies from 3.9 to 5.2 dB.
17 March 2021 in IEEE Transactions on Electromagnetic Compatibility
Unintentional as well as intentional electromagnetic interference can cause interference and performance degradation of microwave circuits or systems. In this article, a modified multiport lumped-network finite-difference time-domain method (FDTD) method based on Y-matrix is proposed, where bilinear transform is used to incorporate the V–I relation of the lumped-network into FDTD iteration. It is further used for simulating transient responses of mesfet -based amplifiers, which are often used in many radar and communication systems. The excitation of such an RF amplifier is assumed to be an intentional electromagnetic interference (IEMI) signal but with different waveforms and magnitudes. Parametric studies are performed to show hybrid effects of waveforms and magnitudes of the IEMI signals on the transient coupled voltages at the output port of such mesfet -based amplifier, with useful information obtained for understanding the interaction process between the intentional electromagnetic interference signals and active components.
The paper utilizes the tightly coupled antenna design method to introduce the tightly coupled form into the design of the reconfigurable reflectarray element, and realizes an ultra-wideband 1bit reconfigurable reflectarray element. The method of the tightly coupled antenna is to connect adjacent elements together. And the adjacent reflectarray elements are connected together, which can expand the bandwidth. The form of tight coupled is achieved by the comb-strip which is used to connect the adjacent reflectarray elements. The tightly coupled reconfigurable reflectarray element is composed of two rectangular patches and two comb-shaped strips. One of the rectangular patches is divided into two patches by the groove, and a PIN diode is loaded on the groove. The opened and closed of the PIN diode can achieve two states with a phase difference of 180°. In addition, the period of the reconfigurable reflectarray element in the polarization direction is one-third of the wavelength, which is also the reason for increasing the bandwidth. The simulation results show that the bandwidth of the 1bit reconfigurable reflectarray element with a difference of 180°±20° between the two-phase states is 8GHz-12.5GHz, and the relative bandwidth is 43%. An 1bit reconfigurable reflectarray is designed with 18×12 elements, and the bandwidth of the array is 40%.
Shipborne antenna is the important part in the communication system of modern ships. However, the coupling between shipborne antennas greatly influences their communication performance so an effective decoupling method is needed to address the coupling problem and guarantee communication quality. In this paper, a metamaterial screen consisting of complementary split ring resonators (CSRRs) which are arranged periodically on the both sides of a substrate, is placed between two cone shipborne antennas to reduce their mutual coupling. The decrease of coupling is verified by a fabricated prototype. The measure results show considerable decoupling effect that the isolation at 0.1 GHz and 0.22 GHz can be increased by 24dB and the isolation in the whole operation band of the cone shipborne antenna, i.e. 0.1-0.5 GHz, is more than 20dB. Moreover, the envelope correlation coefficient (ECC) in 0.1-0.25 GHz band, which is the band with the strongest coupling, is below 0.15. The simulated and measured results indicate that this metamaterial screen can be applied to enhance the isolation between two shipborne antennas.
A high fidelity time-domain disk-cone antenna is proposed in this letter for electromagnetic pulse measuring. The proposed antenna is formed by a disk, a lower cone, an upper cone and a coaxial cable feed. Different from the traditional disk-cone antenna, a small upper cone is added between the disk and lower cone in order to improve the antenna's capacitance distribution and realize impedance matching. With further optimization, the proposed antenna has good broadband characterristics and high pulse fidelity, which makes itself a good candidate for electromagnetic pulse measuring.