Automated robotic systems require reliable docking mechanisms to extend their functional capabilities. In this article, we present a simplified piezoelectric docking mechanism (PDM) inspired by the bolt–nut connector to overcome the limitations of existing docking mechanisms regarding electromagnetic compatibility, size, and complexity. The piezoelectric nut (PN) is a driving component of the PDM that is capable of driving screws by exciting traveling waves. The key dimension of the PN is optimized to increase the output performance by creating dynamical model. Experimental results show that the maximum clamping force of the PDM prototype in the rigid connection state is 3.1 N, and the prototype can work in an environment of 100 °C, 1.8-T magnetic field, and 10 –4 -Pa pressure. Finally, two simple metal arms are machined to verify the feasibility of potential application of the PDM. This study provides a new idea to develop the rigidly connected docking mechanisms.
Utilizing the inherent advantages of the piezoelectric driving technology, such as good adaptability to vacuum environment and no electromagnetic interference, a novel self-moving framed piezoelectric actuator is proposed, simulated, and tested in this study, holding a potential application for magnetic confinement fusion. Four piezoelectric composite beams form a framed piezoelectric actuator. Two orthogonal vibration modes are excited and coupled in the framed piezoelectric actuator, producing a microscopic elliptical motion at its driving feet. Due to the friction, the framed piezoelectric actuator can move on a rail, thereby constructing the railed carrying system. Numerical simulation is carried out to confirm the operation principle and to conduct the dimensional optimization of the proposed framed piezoelectric actuator. A prototype of the proposed framed piezoelectric actuator with a weight of 83.8 g is manufactured, assembled, and tested, to verify the piezoelectric actuation concept. The optimal driving frequency of 20.75 kHz is obtained for the proposed actuator prototype, and at the excitation voltage of 400 Vpp its maximum mean velocity of 384.9 mm/s is measured. Additionally, the maximum load weight to self-weight of the proposed actuator prototype reached up to 10.74 at the excitation voltage of 300 Vpp. These experimental results validate the feasibility of the piezoelectric actuation concept on the railed carrying system.