In this study, microstructural evolution and its effects on mechanical properties across the thickness of a 120 mm Ni-Cr-Mo industrial ultra-heavy steel plate were quantitatively investigated by means of optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM) and electron back-scatter diffraction (EBSD). The results show that the martensite fraction is 65% at 10 mm and disappears at 40 mm, while granular bainite appears at 35 mm and climbs up to as high as 32% at 60 mm, with M-A constituents significantly coarsened. The strength drops with the gradual coarsening of the laths as well as decreased martensite fraction from the surface to the centre. The toughness is mainly affected by the block size and the morphology and quantity of M-A constituents. This study established a multivariate function between the microstructure and toughness (50% fibre area transition temperature, FATT₅₀) with careful consideration of the influence of effective grain size (EGS) and M-A constituent size distribution.

Twinning-induced plasticity (TWIP) steel is an ideal material for impact-resistant structures and energy absorption because of its high product of strength and elongation. However, compared with other advanced high-strength steels, the relatively low yield strength of TWIP steel is one of the important shortfalls that significantly limits its engineering applications. To enhance the comprehensive properties of TWIP steel, a machine learning design strategy that integrated comparative modelling, SHAP analysis, and multi-objective optimization were adopted in this study. Initially, various machine learning algorithms were compared for their predictive accuracy based on normalized data (273 entries) regarding the microstructure and properties of TWIP steel. Then, performance prediction models for yield strength, tensile strength, and elongation were established. SHAP analysis was subsequently employed to assess the significance and explicit laws of composition and microstructures in these three target properties, identifying key elements that enhance the overall performance. Furthermore, two new TWIP steels with high yield strengths and high products of strength and elongation were developed via multi-objective optimization. Under conventional hot forging + hot rolling + cold rolling + annealing processes, the two designed TWIP steels had yield strengths of 585 MPa and 560 MPa, tensile strengths of 1055 MPa and 1101 MPa, elongations of 55% and 58.5%, and products of strength and elongation of 58.0 GPa% and 66.4 GPa%, respectively. The yield strengths of the designed TWIP steels significantly improved while maintaining a reasonable product of strength and elongation. This work provides important references for the rational development of new TWIP steels.

The evolution of texture and grain orientations in a cold-rolled steel of BCC structure was simulated by a reaction stress (RS) model. The results show that cold-rolled texture could be assessed based on a RS model because the stress and strain are considered to remain consistent in the deformation process. The strain consistency is actualized by the cooperation of two plastic strains and an elastic strain. The accumulation range of each reaction stress and different activation abilities of {110} and {112} slip systems strongly affect the calculated deformation textures. The values of reaction stress are influenced by elastic anisotropy; however, the effects are greatly reduced because its corresponding reaction stress accumulation is limited. Typical α-fiber and γ-fiber textures are achieved when the reaction stress accumulation coefficients α_ijs are chosen suitably. Furthermore, the α_ij values that are selected based on statistically calculated textures can also be used to simulate the orientation change of multiple orientations. The existence of reaction stress is able to stabilize crystallographically symmetrical orientations under rolling deformation, in which the Schmid factors of several slip systems are identical.

In this study, the evolutions of Cube and {115} orientations of a cold-rolled ultra-thin non-oriented silicon steel were investigated using a combination of experimental investigation and the crystal plasticity finite element method (CPFEM). The results show that Cube orientations remain relatively stable when their initial deviation angles from the ideal Cube orientation are less than 12°, even after a 60% cold rolling reduction. However, larger deviations occur due to higher strain near grain boundaries. Furthermore, the {115} orientations, with an initial deviation of ~18° from the ideal Cube orientation, become separated into different orientation regions during cold rolling. Some regions gradually approach the ideal Cube orientation as cold rolling progresses and reach ~12.5° deviation from the ideal Cube at a 40% reduction. This study demonstrates good agreement between simulation and experimental results, highlights the micro-deformation mechanisms during rolling, and offers insights for optimizing the ultra-thin strip rolling process.

Twinning behaviors in grains during cold rolling have been systematically studied in preparing ultra-thin grain-oriented silicon steel (UTGO) using a commercial glassless grain-oriented silicon steel as raw material. It is found that the twinning system with the maximum Schmid factor and shear mechanical work would be activated. The area fraction of twins increased with the cold rolling reduction. The orientations of twins mainly appeared to be α-fiber (//RD), most of which were {001} orientation. Analysis via combining deformation orientation simulation and twinning orientation calculation suggested that {001} oriented twinning occurred at 40–50% rolling reduction. The simulation also confirmed more {100} oriented twins would be produced in the cold rolling process and their orientation also showed less deviation from ideal {001} orientation when a raw material with a higher content of exact Goss oriented grains was used.