Parallel-sided foil sections are used for centerboards and rudders in sailing dinghy classes and also for struts placed in a fluid flow. The objective of this work is to create a systematic series of parallel-sided sections to be used under different conditions, with an emphasis on the sailing dinghies 470, 420 and Optimist. The loss, and surprisingly the gain, in performance relative to 4-digit NACA sections are also investigated. A 2D Reynolds-averaged Navier–Stokes solver is used with the k-ω SST turbulence model and the gamma transition criterion. A verification study is carried out based on four grids of systematically varied density, and results compared with experimental data on a NACA 64-006 section. The parallel-sided sections are modeled with rational Bézier curves whose geometrical parameters permit to link the shape of the profile to physical variables, which are systematically varied. Three Reynolds numbers and two angles of attack are investigated. Systematic plots show the influence of the trailing edge angle and nose radius for the different section families, and the optimum combination is presented in a table. Physical explanations of the trends, and of the exceptions, are given in the paper, using flow visualizations as well as pressure and friction plots.

The purpose of this paper is to design an improved centerboard for the Olympic 470 sailing dinghy sailing upwind. The design is improved by introducing a composite design that makes the centerboard twist to windward when sailing upwind, thereby reducing the angle of attack of the hull. The results show that a beneficial twist up to 1.5° is possible to achieve without compromising the centerboard strength. According to our estimates, by utilizing the improved design it is possible to obtain a gain of up to 9 s per race in a world cup race.

Because of the long history of the Finn Dinghy sailing class, the difference between a gold medal and a mediocre result often comes down to personal mistakes of the sailor, or to who has the most optimised equipment. Regarding the latter, the Finn class rules permit certain design variations of the hull, mast, sail and rudder. In the current contribution, we describe a method for developing a customised rudder system aimed at optimal performance during the Tokyo 2020 Olympics. Based on hydrodynamic analysis of existing rudder designs, an improved rudder geometry was developed. Based on the concept geometry, the rudder and tiller were structurally designed and manufactured to achieve high stiffness and sufficient strength, while respecting the minimum mass requirements as specified by the rules.