In this paper, a high-gain miniaturized microstrip patch antenna was designed using engineered magnetic materials as both substrate and superstrate. The proposed antenna was numerically analyzed, fabricated, and measured. To obtain high permeability and permittivity, an engineered magnetic material with Electric-LC Resonators in the superstrate layer and 2nd kind Hilbert fractals in the substrate were used. Equivalent material parameters technique was also used for efficient simulation of metamaterials in the substrate and the superstrate. The simulation and measurement results show a gain improvement of 8.1 dB, and a miniaturization factor of 4.8 for the miniaturized antenna at 534 MHz. Additionally, using superstrate causes to reduce antenna size to 170 × 170 × 37 mm3 and patch size less than λ/100 resonance frequency.
25 January 2022 in Sensors and Actuators A: Physical
This article presents the design of a planar high gain and wideband antenna using a negative refractive index multilayer superstrate in the X‐band. This meta‐antenna is composed of a four‐layer superstrate placed on a conventional patch antenna. The structure resonates at a frequency of 9.4 GHz. Each layer of the metamaterial superstrate consists of a 7 × 7 array of electric‐field‐coupled resonators, with a negative refractive index of 8.66 to 11.83 GHz. The number of layers and the separation of superstrate layers are simulated and optimized. This metamaterial lens has significantly increased the gain of the patch antenna to 17.1 dBi. Measurements and simulation results proved about 10 dB improvement of the gain.
20 February 2020 in IET Microwaves, Antennas & Propagation
In this study, a corrugated substrate‐integrated waveguide (CSIW) is used to design a passive microwave displacement sensor. Hence, one of the electric walls of the proposed structure is formed by open‐circuited quarter guided wavelength stubs and the other walls are made by metal vias and moveable copper metal is placed on the stubs. By displacing the moveable metal layer along with the stubs, the length of the stubs is changed and therefore the resonant frequency is shifted. An analytical model that relates the variation of the resonant frequency and the displacement has been formulated. The proposed sensor seems like a simple structure and it is operated at 2.4–2.9 GHz. There is a good agreement between the measured results and those obtained by simulation. The measured results indicate that the sensor provides a high dynamic range of displacement of 15 mm and high sensitivity of 25.16 MHz/mm.
This paper presents a broadband circularly polarized (CP) cavity-backed antenna array for switched beam applications. The antenna array consists of four SIW CP slot elements which are in a 2 × 2 combination and uses a Butler feeding network. To improve the performance of array’s CP purity, SIW elements in antenna are sequentially rotated with respect to each other. Extracted results show that the antenna has 1.9 GHz impedance bandwidth between the frequency ranges of 9.08 and 10.96 GHz (∼40%). The minimum 3 dB axial ratio bandwidth between ports supports the 9.35–10.37 GHz. The measured peak gain of the presented array is 13.1 dBic that could scan solid angle ∼25 steradian.
Demand for antennas that are compact and operate over an ultra‐wideband (UWB) frequency range is growing rapidly as UWB systems offer high resolution imaging capability and high data rate transmission in the order of Gb/s that is required by the next generation of wireless communication systems. Hence, over the recent years the research and development of UWB antennas has been widely reported in literature. The main performance requirements sought from such antennas include: (1) low VSWR of <2; (2) operation over 7.6 GHz from 3 to 10.6 GHz; and (3) good overall radiation characteristics. Significant size reduction and low manufacturing cost are also important criteria in order to realize a cost‐effective and miniature system. Other desirable requirements include compatibility and ease of integration with RF electronics.