In this paper, modified Mie-Lorentz coefficients for graphene-based multilayered spherical structures are extracted. To this end, electromagnetic fields in each region of the solution domain are expanded in terms of vector spherical harmonics. By properly choosing the geometrical dimensions of the spheres, graphene coatings are considered as thin shells with the surface conductivities calculated by the Kubo formulas. Later, graphene surface currents are incorporated in the boundary conditions on tangential magnetic fields. The aforementioned procedure is conducted at the interface of two adjacent layers in order to relate the Mie coefficients of the successive layers recurrently. The validity of the extracted equations is verified by calculating the extinction cross section of various graphene-based multilayered spherical structures and comparing them with the results of finite integration method. Possibility of tuning the graphene plasmonic resonances in multiple layers by varying graphene carrier doping density is discussed, as well. The potential application of our analysis is scattering shaping of graphene-based multilayered spherical configurations for cloaking, super-scattering, medical treatment, and tagging.
19 May 2020 in International Journal of RF and Microwave Computer-Aided Engineering
This article presents the design of a planar high gain and wideband antenna using a negative refractive index multilayer superstrate in the X‐band. This meta‐antenna is composed of a four‐layer superstrate placed on a conventional patch antenna. The structure resonates at a frequency of 9.4 GHz. Each layer of the metamaterial superstrate consists of a 7 × 7 array of electric‐field‐coupled resonators, with a negative refractive index of 8.66 to 11.83 GHz. The number of layers and the separation of superstrate layers are simulated and optimized. This metamaterial lens has significantly increased the gain of the patch antenna to 17.1 dBi. Measurements and simulation results proved about 10 dB improvement of the gain.
11 January 2022 in IEEE Transactions on Antennas and Propagation
In this paper, the propagation equations of the electromagnetic waves in an inhomogeneous plasma column are solved and the analytical estimation of the efficiency of the plasma antenna is presented. To validate the analytical results, an experimental prototype of a plasma monopole antenna is implemented while it is simulated using a commercial full-wave electromagnetic simulator. The implemented antenna can be excited by two different RF signals, at 450 MHz and 1500 MHz, with a controllable power level between 1 and 50 watts to adjust the effective length of the antenna. The proposed configuration allows both communication and excitation waves to be applied to a single coupling sleeve on the plasma column using a diplexer. Based on the measurement of the phase difference of two different positions along the column, using a phase difference detector microchip, the plasma density is estimated along the column. Good agreement between the results validates the proposed analytical method. The results show that the efficiency of a surface-wave-excited antenna strongly depends on the gas pressure, the excitation frequency, and the thickness of the tube. Therefore, for an optimized plasma antenna, all these parameters have to be properly employed.
1 November 2005 in AEU - International Journal of Electronics and Communications
A Ku-band quasi-planar microstrip antenna array fed by a gap-waveguide feed network is demonstrated. The upper microstrip substrate is not in electric contact with the lower feed network, which relaxes the fabrication process considerably. The 64-element array consists of sixteen 2-by-2 subarrays arranged to form an 8-by-8 configuration of array elements. To ensure minimum feed losses, the subarrays are excited by a corporate feed network composed of groove gap waveguide components. The first part of the feed network consists of the ground plane of the antenna array which also plays the role of the upper plate of the waveguide network. The second part is an artificial magnetic conductor (AMC) structure realized within the lower plate of the waveguide feed network via milling. Use has been made of a bed-of-nails AMC structure. Array elements are rectangular patches showing 8.85 dBi gain each at the center frequency. The maximum measured gain of the antenna array is 26.18 dBi which is equivalent to 57.81% aperture efficiency.
4 April 2019 in Journal of Electromagnetic Waves and Applications
A double slotted symmetrical split ring resonator with an inductive stub in its inner ring is presented as a Single Negative Electric (SNG) metamaterial to suppress mutual coupling between two E-plane coupled microstrip line fed rectangular dielectric resonator antenna (RDRA) array. The proposed SRR exhibits two resonant frequencies and wide stop-bands. The -10 dB bandwidth of S21 from 2022MHz to 2720 MHz and from 2187 MHz to 3839 MHz are obtained for the first structure, #1, and the second structure, #2, respectively. By introducing an ENG layer between the two RDRAs, the experimental reduction in mutual coupling is more than 23 dB with a small frequency shift (∼ 20 MHz), while the impedance matching is improved. The radiation efficiency and total efficiency are increased while the far-field pattern in the E-plane is not disturbed.