This paper presents a 9-bit pipelined successive-approximation-register (SAR) ADC consisting of 4-stage sub-SAR ADCs using replica-biased dynamic residue amplifiers. The replica-biased amplifier in the 1st stage keeps the output common mode constant over various input voltage conditions, which enables cascading multiple dynamic-amplifier-based pipeline stages. The replica-biased amplifiers from the 2nd to the last stage maintain the differential gain, eliminating the need for bit-weight calibrations. The 1st~3rd stages utilize a loop-unrolled SAR structure for high-speed conversion. A 9-bit 500MS/s pipelined SAR ADC is fabricated in 28nm CMOS process, and it achieves SNDR of 49.1dB and SFDR of 60.4dB at low frequency and SNDR of 45.3dB and SFDR 56.0dB at Nyquist frequency. The measured performance over wide input common-mode and temperature range validates the operation of the replica-biased dynamic amplifiers. The measured Walden figure of merit (FoMw) is 23.3fJ/conversion-step and Schreier FoM (FoMs) is 158.6dB, respectively.
14 June 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
This paper presents a 32x32 pseudo-ReRAM-based analog computing-in-memory (CIM) macro in 28nm CMOS. A 4b self-error-correcting word-line (WL) driver reduces the analog compute inaccuracy while minimizing the latency. A stability compensating dummy row maximizes the accumulation length of the multiply-and-accumulate (MAC). The columnsensing dual-phase 6b successive-approximation-register (SAR) analog-to-digital-converter (ADC) maximizes the through-put with minimized pitch. The proposed CIM occupies an active area of 0.0155mm2 and consumes 4.36mW with an average energy efficiency of 25.8TOPS/W. The measured performance achieves the highest normalized throughput with an end-to-end inference accuracy comparable to FP32 with less than a 0.11% drop.
This paper presents an electrochemical impedance spectroscopy (EIS) system-on-chip in 0.18- CMOS, achieving a wide scan frequency range of 1.25 MHz. An on-chip direct digital frequency synthesizer generates a digital sine wave as well as in-phase and quadrature-phase clocks that are synchronized to the sinewave. A chopped sampling mixer realizes lock-in detection without requiring quadrature sinewaves while suppressing low-frequency noise and offset. The receive utilizes a 12-bit pipelined SAR ADC operating in 5 MS/s in combination with a digital averaging filter to maximize the dynamic range. The measured performance shows that the prototype EIS chip achieves the highest frequency scan range with a comparable dynamic range of 108 dB and power consumption of 14 mW when compared with the previous state-of-the-art prototypes.