To achieve the full potential of monolithic perovskite/silicon tandem solar cells, crystal defects and film inhomogeneities in the perovskite top cell must be minimized. We discuss the use of methylenediammonium dichloride as an additive to the perovskite precursor solution, resulting in the incorporation of in situ–formed tetrahydrotriazinium (THTZ-H + ) into the perovskite lattice upon film crystallization. The cyclic nature of the THTZ-H + cation enables a strong interaction with the lead octahedra of the perovskite lattice through the formation of hydrogen bonds with iodide in multiple directions. This structure improves the device power conversion efficiency (PCE) and phase stability of 1.68 electron volts perovskites under prolonged light and heat exposure under 1-sun illumination at 85°C. Monolithic perovskite/silicon tandems incorporating THTZ-H + in the perovskite photo absorber reached a 33.7% independently certified PCE for a device area of 1 square centimeter.
Reducing charge carrier transport losses, improving selectivity, and minimizing nonradiative recombination are essential for enhancing the efficiency and stability of perovskite/silicon tandem solar cells. We used a hybrid two-step perovskite deposition method that is compatible with industry-standard textured silicon, incorporating a perovskite surface treatment based on 1,3-diaminopropane dihydroiodide. The interaction of this molecule with the perovskite surface increased the majority charge carrier concentration at the electron-selective contact, which reduced interfacial recombination. Simultaneously, this field-effect passivation increased the electron concentration across the entire intrinsic perovskite absorber, which increased conductivity and reduced transport losses. Combined, this yields high-performance, fully textured perovskite/silicon tandem solar cells, achieving a 1-sun AM1.5G conversion efficiency of 33.1% with an open-circuit voltage of 2.01 volts and an extended outdoor stability in the Red Sea Coast.
Conjugated polymer films, which can conduct both ionic and electronic charges, are central to building soft electronic sensors and actuators. Despite the possible interplay between light absorption and the mixed conductivity of these materials in aqueous biological media, no single polymer film has been utilized to create a solar-switchable organic bioelectronic circuit that relies on a fully reversible and redox reaction-free potentiometric photodetection and current modulation. Here we demonstrate that the absorption of light by an electron and cation-transporting polymer film reversibly modulates its electrochemical potential and conductivity in an aqueous electrolyte, which is harnessed to design an n-type photo-electrochemical transistor (n-OPECT). By controlling the intensity of light incident on the n-type polymeric gate electrode, we generate transistor output characteristics that mimic the modulation of the polymeric channel current achieved through gate voltage control. The micron-scale n-OPECT exhibits a high signal-to-noise ratio and an excellent sensitivity to low light intensities. We demonstrate three direct applications of the n-OPECT, i.e., a photoplethysmogram recorder, a light-controlled inverter circuit, and a light-gated artificial synapse, underscoring the suitability of this platform for a myriad of biomedical applications that involve light intensity changes.
15 September 2021 in Energy & Environmental Science
Hybrid halide perovskites are found to contain multiple types of nanoscale defects that play varied roles in charge trapping – from highly detrimental to relatively benign.
Interface engineering is the core of device optimization, and this is particularly true for perovskite photovoltaics (PVs). The steady improvement in their performance has been largely driven by careful manipulation of interface chemistry to reduce unwanted recombination. Despite that, PVs devices still suffer from unavoidable open circuit voltage (VOC) losses. Here, we propose a different approach by creating a photo-ferroelectric perovskite interface. By engineering an ultrathin ferroelectric two-dimensional perovskite (2D) which sandwiches a perovskite bulk, we exploit the electric field generated by external polarization in the 2D layer to enhance charge separation and minimize interfacial recombination. As a result, we observe a net gain in the device VOC reaching 1.21 V, the highest value reported to date for highly efficient perovskite PVs, leading to a champion efficiency of 24%. Modeling depicts a coherent matching of the crystal and electronic structure at the interface, robust to defect states and molecular reorientation. The interface physics is finely tuned by the photoferroelectric field, representing a new tool for advanced perovskite device design.