The culture medium in many fermentations is a non-Newtonian fluid. In bacterial alginate batch production, the broth becomes more pseudoplastic as the alginate concentration increases, which impairs the mixing process. This work characterizes the effect of the interaction between changing broth rheology and impeller mixing on a bioreactor fluid dynamics. Experimentally, a fermentation with evolving broth pseudoplastic rheology is reproduced. Three fermentation stages are mimicked using appropriate solutions of water and xanthan gum. Impeller torque measurements are reported. The weakening of the impellers’ interaction over the fermentation process is identified. To overcome the experimental limitations, CFD is applied to study the evolution of the fermentation fluid flow patterns, velocity field, dead zones, and vortical structures. Precessional vortex macro-instabilities are identified as being responsible for the unstable flow patterns identified at the earlier stages of the fermentation. A stable parallel flow pattern accounts for the weakest impellers’ interaction at the final stage. Overall, this work contributes with a complete workflow to adapt CFD models for characterization and aided design of stirred tanks with changing broth pseudoplastic rheology as well as an evolving flow regime.
Computational fluid dynamic (CFD) has been increasingly exploited for the design and optimization of (bio)chemical processes. Validation is a crucial part of any modeling application. In CFD, when validation is done, complex and expensive techniques are normally employed. The aim of this study was to test the capability of the CFD model to represent a residence time distribution (RTD) test in a temporal and spatial fashion inside a reactor. The RTD tests were carried out in a tubular reactor operated in continuous mode, with and without the presence of artificial biomass. Two hydraulic retention times of 7.2 and 13 h and superficial velocities 0.65, 0.6, 1.3, and 1.1 m h−1 were evaluated. As a tracer, an aqueous solution of methylene blue was used. The CFD model was implemented in ANSYS Fluent, and to solve the equations system, the SIMPLE scheme and second-order discretization methods were selected. The proposed CFD model that represents the reactor was able to predict the spatial and temporal distribution of the tracer injected in the reactor. The main disagreements between the simulations and the experimental results were observed, especially in the first 50 min of the RTD, caused by the different error sources, associated to the manual execution of the triplicates, as well as some channeling or tracer by-pass that cannot be predicted by the CFD model. The CFD model performed better as the time of the experiment elapsed for all the sampling ports. A validation methodology based on an RTD by sampling at different reactor positions can be employed as a simple way to validate CFD models.