José Rivas

Mr. José Rivas

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2018 in Biotechnology Reports
Verified
Journal Article
Open access
LPLjubomir Papić
Ljubomir Papić
JRJosé Rivas
José Rivas
STSoledad Toledo
Soledad Toledo
JRJaime Romero
Jaime Romero
Double-stranded RNA can induce interference processes. The specificity of this system raises the possibility of using dsRNA for therapeutic applications targeting viral diseases. Escherichia coli HT115 (DE3) has been widely used to produce dsRNA; however, the kinetics of dsRNA production and the relationship between dsRNA and biomass remain unknown. Our aims were to study the kinetics of dsRNA production and to improve dsRNA productivity with fed-batch technology. The results revealed that the production of dsRNA was growth-associated. In batch fermentation, the dsRNA/biomass yield remained close to 0.06 g·g-1, with a maximum productivity of 11.1 mg l-1 h-1 at 10 h of culture. In fed-batch fermentation, the yield was 0.06 g g-1, with a maximum dsRNA productivity of 15.2 mg l-1 h-1 at the end of the feed (12 h). Therefore, to increase the production of dsRNA, it is necessary to enhance the biomass that produces the recombinant nucleic acid.

28 February 2022 in Fermentation
Verified
Journal Article
Open access
PDF file
MRMaría Constanza Sadino Riquelme
María Constanza Sadino Riquelme
JRJosé Rivas
José Rivas
David JeisonDavid Jeison
David Jeison
ADAndres Donoso-Bravo
Andres Donoso-Bravo
Robert E HayesRobert E Hayes
Robert E Hayes
The culture medium in many fermentations is a non-Newtonian fluid. In bacterial alginate batch production, the broth becomes more pseudoplastic as the alginate concentration increases, which impairs the mixing process. This work characterizes the effect of the interaction between changing broth rheology and impeller mixing on a bioreactor fluid dynamics. Experimentally, a fermentation with evolving broth pseudoplastic rheology is reproduced. Three fermentation stages are mimicked using appropriate solutions of water and xanthan gum. Impeller torque measurements are reported. The weakening of the impellers’ interaction over the fermentation process is identified. To overcome the experimental limitations, CFD is applied to study the evolution of the fermentation fluid flow patterns, velocity field, dead zones, and vortical structures. Precessional vortex macro-instabilities are identified as being responsible for the unstable flow patterns identified at the earlier stages of the fermentation. A stable parallel flow pattern accounts for the weakest impellers’ interaction at the final stage. Overall, this work contributes with a complete workflow to adapt CFD models for characterization and aided design of stirred tanks with changing broth pseudoplastic rheology as well as an evolving flow regime.

6 November 2020 in Computation
Verified
Journal Article
Open access
PDF file
JRJosé Rivas
José Rivas
MRMaría Constanza Sadino Riquelme
María Constanza Sadino Riquelme
IGIgnacio Garcès
Ignacio Garcès
Andrea CarvajalAndrea Carvajal
Andrea Carvajal
ADAndres Donoso-Bravo
Andres Donoso-Bravo
Computational fluid dynamic (CFD) has been increasingly exploited for the design and optimization of (bio)chemical processes. Validation is a crucial part of any modeling application. In CFD, when validation is done, complex and expensive techniques are normally employed. The aim of this study was to test the capability of the CFD model to represent a residence time distribution (RTD) test in a temporal and spatial fashion inside a reactor. The RTD tests were carried out in a tubular reactor operated in continuous mode, with and without the presence of artificial biomass. Two hydraulic retention times of 7.2 and 13 h and superficial velocities 0.65, 0.6, 1.3, and 1.1 m h−1 were evaluated. As a tracer, an aqueous solution of methylene blue was used. The CFD model was implemented in ANSYS Fluent, and to solve the equations system, the SIMPLE scheme and second-order discretization methods were selected. The proposed CFD model that represents the reactor was able to predict the spatial and temporal distribution of the tracer injected in the reactor. The main disagreements between the simulations and the experimental results were observed, especially in the first 50 min of the RTD, caused by the different error sources, associated to the manual execution of the triplicates, as well as some channeling or tracer by-pass that cannot be predicted by the CFD model. The CFD model performed better as the time of the experiment elapsed for all the sampling ports. A validation methodology based on an RTD by sampling at different reactor positions can be employed as a simple way to validate CFD models.

1 November 2021 in Aquacultural Engineering
Verified
Journal Article
Closed access
JRJosé Rivas
José Rivas
JBJose Luis Baquedano
Jose Luis Baquedano
RVRoberto Valledor
Roberto Valledor
GJGabriel Jerez
Gabriel Jerez
PAPablo Albistur
Pablo Albistur
ADAndrés Donoso-Bravo
Andrés Donoso-Bravo