Peter Sergeant

Peter Sergeant

orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
AHAhmed Mohammed Abdelmoneam Hemeida
Ahmed Mohammed Abdelmoneam Hemeida
ALAntti Lehikoinen
Antti Lehikoinen
PRPaavo Rasilo
Paavo Rasilo
HVHendrik Vansompel
Hendrik Vansompel
Anouar BelahcenAnouar Belahcen
Anouar Belahcen
PSPeter Sergeant
Peter Sergeant
This paper presents a simple and efficient magnetic equivalent circuit (MEC) model for surface axial flux permanent magnet synchronous machines. The MEC model is used to solve all the electromagnetic properties of the machine including the no load, full load voltages, cogging torque, torque ripple, and stator iron core losses. Moreover, this approach can be extended for all surface permanent magnet synchronous machines. The main novelty of this approach is the development of a static system, which accounts for the rotation. The model takes into account the rotor rotation via time-dependent permanent magnet magnetization sources. The static system matrix facilitates a very fast solving. In addition, to take into account the three-dimensional (3-D) effect, a multislicing of the machine in the radial direction is done. This boosts the simulation time to only 60 s for six slices and 50 time steps including the nonlinear behavior of the stator elements with a great accuracy. Additionally, the number of elements in the MEC can be adjusted to reduce the computational time. This model is verified by means of 3-D and two-dimensional (2-D) multislice finite-element models. In addition, experimental validations are also provided at the end.

1 January 2008 in IET Electric Power Applications
Verified
Journal Article
Closed access
PSPeter Sergeant
Peter Sergeant
ABA. Van Den Bossche
A. Van Den Bossche
To provide power to a moving vehicle without using contacts, a transformer is presented, consisting of a fixed primary winding inductively coupled to a moving secondary winding. The primary winding along the whole trajectory of motion is configured such that its magnetic stray field and its self inductance are limited. This winding transfers power to the moving coupler containing the yoke and the secondary winding. The secondary winding is a resonant circuit, with a rectifier and the motor of the vehicle as load. To describe the energy transmission system, a numerical model is developed that combines an electrical circuit with a 2D nonlinear finite element model. This model is used for an optimisation of the design. For the optimised configuration, an experimental setup is built to validate the model by measurements. A sensitivity analysis is carried out concerning the primary current, the supply frequency, the position of the secondary winding relative to the primary winding and the number of vehicles coupled with the primary winding.

12 June 2014 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
AHAhmed Hemeida
Ahmed Hemeida
PSPeter Sergeant
Peter Sergeant
This paper presents a complete analytical model for surface-mounted permanent magnet synchronous machines (PMSMs). A new simple and fast technique was developed to obtain accurate results in the calculation of machine parameters electromotive force (EMF), torque, and losses. This technique is based upon the combined solution of two models. The first model generates an exact solution of Maxwell's equations in the air gap area applied to a very simple geometry. The second model gives an accurate solution in the detailed parts with complex geometry, based on a magnetic equivalent circuit (MEC) to obtain fast and accurate results in a simple way. The machine's global quantities are then obtained and validated using the results of a finite element model (FEM) for different loading conditions and geometries. Compared with FEM, the proposed combined solution has the advantage of flexibility in the geometrical machine parameters, significantly less CPU time and an accuracy for the considered PMSM up to 4.85% in the EMF, 4.41% in the torque, and 4.44% in the iron losses. Finally, the relation between grid refinement in the MEC (coarse or fine grid of reluctances) and accuracy is pointed out, showing that the EMF can be accurately computed with a rather coarse grid, while accurate loss computation requires a fine grid.

31 January 2022 in Energies
Verified
Journal Article
Open access
PDF file
Ahmed SelemaAhmed Selema
Ahmed Selema
Mohamed IbrahimMohamed Ibrahim
Mohamed Ibrahim
PSPeter Sergeant
Peter Sergeant
Metal additive manufacturing (AM) has been growing remarkably in the past few years. Thanks to the advantages of unmatched flexibility and zero material waste, this clean technology opens the door for new design solutions with greater material efficiency, which are not possible through conventional machining techniques. In this paper, we provide a technology overview of metal AM techniques that can be utilized in a wide range of applications, including constructing electrical machines. Different techniques of metal AM are discussed and compared. Additionally, the impact of the material forms (powder/wire) on printing speed and quality are studied. Based on the industrial and technical literature, this paper provides a comprehensive review of metal AM in the fabrication of electrical machines and their applications. This includes the current state of the art and associated benefits of AM in these applications.

11 July 2014 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
DKDamian Kowal
Damian Kowal
PSPeter Sergeant
Peter Sergeant
LDLuc Dupre
Luc Dupre
LVLode Vandenbossche
Lode Vandenbossche
The goal of this paper is to investigate the accuracy of modeling the excess loss in electrical steels using a time domain model with Bertotti's loss model parameters n 0 and V 0 fitted in the frequency domain. Three variants of iron loss models based on Bertotti's theory are compared for the prediction of iron losses under sinusoidal and non-sinusoidal flux conditions. The non-sinusoidal waveforms are based on the realistic time variation of the magnetic induction in the stator core of an electrical machine, obtained from a finite element-based machine model.

16 December 2008 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
PSPeter Sergeant
Peter Sergeant
ABAlex Van Den Bossche
Alex Van Den Bossche
This paper studies the losses in the magnets of a permanent-magnet synchronous machine (PMSM) with surface magnets caused by square voltage pulse width modulation (PWM) waveforms. First, the conductivity of the magnets is determined. Second, the effect of segmentation on the losses is calculated by a 3-D time-harmonic finite element model for sinusoidal waveforms. More segmentation of the magnets in axial and circumferential direction results in much lower losses in the magnets, but more losses in the massive rotor yoke. In a third step, the losses are simulated and measured on an experimental PMSM for square waveforms generated by PWM. Superposition of appropriate sinusoidal losses obtained by a time-harmonic FEM seems to be acceptable in order to predict losses in a PMSM for square voltage waveforms.