In condition based maintenance, different signal processing techniques are used to sense the faults through the vibration and acoustic emission signals, received from the machinery. These signal processing approaches mostly utilise time, frequency, and time-frequency domain analysis. The features obtained are later integrated with the different machine learning techniques to classify the faults into different categories. In this work, different statistical features of vibration signals in time and frequency domains are studied for the detection and localisation of faults in the roller bearings. These are later classified into healthy, outer race fault, inner race fault, and ball fault classes. The statistical features including skewness, kurtosis, average and root mean square values of time domain vibration signals are considered. These features are extracted from the second derivative of the time domain vibration signals and power spectral density of vibration signals. The vibration signal is also converted to the frequency domain and the same features are extracted. All three feature sets are concatenated, creating the time, frequency and spectral power domain feature vectors. These feature vectors are finally fed into the K- nearest neighbour, support vector machine and kernel linear discriminant analysis for the detection and classification of bearing faults. With the proposed method, the reduction percentage of more than 95% percent is achieved, which not only reduces the computational burden but also the classification time. Simulation results show that the signals are classified to achieve an average accuracy of 99.13% using KLDA and 96.64% using KNN classifiers. The results are also compared with the empirical mode decomposition (EMD) features and Fourier transform features without extracting any statistical information, which are two of the most widely used approaches in the literature. To gain a certain level of confidence in the classification results, a detailed statistical analysis is also provided.

Optimization problems relating to wireless sensor network planning, design, deployment and operation often give rise to multi-objective optimization formulations where multiple desirable objectives compete with each other and the decision maker has to select one of the tradeoff solutions. These multiple objectives may or may not conflict with each other. Keeping in view the nature of the application, the sensing scenario and input/output of the problem, the type of optimization problem changes. To address different nature of optimization problems relating to wireless sensor network design, deployment, operation, planing and placement, there exist a plethora of optimization solution types. We review and analyze different desirable objectives to show whether they conflict with each other, support each other or they are design dependent. We also present a generic multi-objective optimization problem relating to wireless sensor network which consists of input variables, required output, objectives and constraints. A list of constraints is also presented to give an overview of different constraints which are considered while formulating the optimization problems in wireless sensor networks. Keeping in view the multi facet coverage of this article relating to multi-objective optimization, this will open up new avenues of research in the area of multi-objective optimization relating to wireless sensor networks.

With global concern for climate change, and for cutting down the energy cost, especially in off grid areas, use of renewable energy has been gaining widespread attention in many areas including cellular communication. The base station (BS) has emerged as a strong candidate for the integration of renewable energy sources (RES), particularly solar and wind. The incorporation of renewable energy opens many possibilities for energy conservation through strategies such as energy cooperation between BSs during the off-peak hours, when the energy harvested from renewable energy sources may become surplus. In this paper, we present the case for cellular BSs enabled with renewable energy sources (RES) to have an arrangement in which the BS provide surplus energy to a neighboring BS, thus minimizing the use of conventional energy. A realistic objective is developed for northern region of Pakistan, which entails modeling of solar panels and wind-turbine according to the average solar irradiation and wind speed of the region. We also model the dynamic load of the BS, which depicts temporal fluctuations with traffic variations. Based on these models we initiate an energy cooperation scheme between the BS in which an energy cost minimization framework is mathematically modeled and solved through the interior point method algorithm. Results are obtained for different times of the year for different number of base stations showing respective energy cost savings.