Permanent magnet eddy current couplings are promising devices for torque and speed transmission without any mechanical contact. In this study, flux-focusing permanent magnet eddy current couplings with double slotted conductor rotors are proposed and investigated. Given the drawback of the accurate three-dimensional finite element method, the purpose of this paper lies to establish an accurate and fast analytical model to evaluate the electromagnetic field and torque of such devices with non-homogeneous boundary conditions. Thus, based on the 2-D sub-domain method, the magnetic vector potential in each sub-domain is formulated and solved by the separation of variables method. Taking into account the eddy current effects and slotting effects, the closed-form expressions of magnetic field, induced current, electromagnetic force and torque for such devices are obtained. Finally, a three-dimensional finite element method is employed to validate the analytical results.
6 September 2022 in IEEE Transactions on Industry Applications
In this study, a novel permanent magnet linear eddy current brake based on the field regulation theory is presented, and the corresponding analytical model is developed. By shifting transversely the field-regulated plate, the real-time and easy control of the braking force can be achieved, which is the intent of the proposed topology. The key structure and operation principle are addressed. In addition, to avoid the excessive computation time and cost when using the numerical method, a practical analytical model for calculating the electromagnetic and force performance is established based on the magnetic equivalent circuit method with variable reluctance. The validity of the model is verified using the 3-D finite element analysis and equivalent prototype experiments. Moreover, further analysis is carried out to investigate the effects of the key geometrical parameters on the braking force-speed characteristic.
An improved structure for axial-flux eddy current couplings with combined rectangle-shaped magnets is proposed to minimize cogging torque without sacrificing torque density. Then, a novel analytical electromagnetic-thermal model, which takes the change of material electromagnetic and thermal characteristics under temperature, is presented to calculate cogging torque, electromagnetic torque, eddy current loss and temperature. The model is valid for the whole working area. The magnetic field distribution is calculated by the quasi 3-D electromagnetic field analytical model. Then cogging torque, electromagnetic torque and eddy current loss can be obtained. Furthermore, an equivalent thermal resistance network model is established. The thermal model takes the previously obtained eddy current losses as the heat source, which is the eddy current loss of copper and copper back iron. With the help of the electromagnetic-thermal model, the characteristics of slip on electromagnetic torque, eddy current loss, copper and permanent magnet temperature rise is also analyzed under the whole working range. The validity of the electromagnetic–thermal model is confirmed with finite element method (FEM) and measurement.
This article proposes a novel flux‐adjustable permanent magnet eddy current coupling with multiple rotors. According to the different functions, the permanent magnet rotors are divided into fixed‐flux and flux‐adjustable rotors. By adjusting the relative position between two types of permanent magnet rotors, the magnetic field, torque, and output speed are controlled without changing the air‐gap length. To quickly and easily analyse the torque performance, an analytical model for the torque of such devices is developed based on the non‐linear magnetic equivalent circuit approach. In the modelling phase, a number of factors are considered, such as the skin effect, the inductance of eddy current field, the temperature effect, and so on. A three‐dimensional finite element method is employed to validate the model results, and the comparative analysis shows the advantages and potential of the proposed topology. The further sensitivity analysis of the key parameters is also made, which offers helpful information for the preliminary design of such devices.
22 October 2025 in IEEE Transactions on Vehicular Technology
The energy consumption for unmanned aerial vehicles (UAV) and the user satisfaction in the UAV-assisted mobile edge computing (MEC) has been optimized considering the UAV supply side and the user demand side simultaneously. The user priority level in the UAV-assisted MEC model has been introduced to match the real scenario. The UAV energy consumption has been modeled, as well as the user satisfaction. To solve the optimization problem effectively, the tasks are scheduled for the UAVs referring to the user priority. Subsequently, a constrained multi-objective evolutionary algorithm based on Non-dominated Sorting Genetic Algorithm II (NSGA-II) has been designed, merging the integrated constraint strategy, the adaptive genetic operator strategy, and the Q-learning-based selection mechanism. The integrated constraint strategy is adopted to comprehensively find the better solutions based on the scoring mechanism; the adaptive genetic operator strategy is used to adjust dynamically the crossover and mutation parameters; the Q-learning-based selection mechanism is to record individual experience and feedback for adaptively learning. In order to verify the performance of the algorithm, the nine experimental cases have been configurated. The IGD and HV indicators are used to characterize the performance compared with the other seven algorithms. The results show that the proposed algorithm has a great advantage in diversity and convergence, and can solve effectively the optimization for UAV energy consumption and user satisfaction in the UAV-assisted MEC.
In China, Grape bagging was done by mostly manual work. In order to improve the intelligence level of grape bagging and reduce the amount of human labor, a robot system for grape bagging was developed. The hardware structure of robot system was designed based on cylindrical coordinate. One kind of grape extraction algorithm based on 2G-R-B was developed. And the control system of grape bagging robot was completed. The robot could realize starting the machine automatically. The performance test of grape bagging robot indicated that the success rate for bagging grape was 85%, and the execution time of a single bagging cycle was 39.6s.