Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are synthetic chemical compounds widely used in different industry fields including food contact materials (FCM), providing resistance to fat and humidity, and non-stick properties. PFAS enter into the food chain directly from the intake of contaminated food or indirectly from the migration of the FCM into the food. This exposure published in different research highlights a public health concern. Therefore, it is necessary to perform analysis of the content of different FCM and evaluate the migration from the FCM under normal conditions of use and storage. This bibliographical review proves that different perfluoroalkyl and polyfluoroalkyl compounds are detected in fast food packaging, microwave popcorn bags, and frying pans, among others. Furthermore, it shows the conditions or factors that favor the migration of the PFAS from the FCM into the food.

The internal surface of food and beverage cans is generally covered with polymeric coatings to preserve food and protect metal substrate from corrosion. Coating materials are complex formulations that contain different starting substances (e.g., monomers, prepolymers, additives, etc.) and in addition during the manufacture of the material several compounds can be formed (e.g., reaction products, degradation products, etc.). These substances have the potential to migrate into the food. Many of them have not been identified and only some have been toxicologically evaluated. This article aims to provide a comprehensive review on the analytical methods used for the identification of potential migrants in can coatings. The migration and exposure to chemicals migrating from can coatings are also reviewed and discussed so far, which is essential for risk assessment. Moreover, a brief section on the current status of the legislation on varnishes and coatings for food contact in Europe is also presented. Liquid chromatography coupled to diode array and fluorescence detectors and particularly to mass spectrometry and gas chromatography–tandem mass spectrometry seem to be the techniques of choice for the identification of potential migrants in can coatings. Some studies have reported migration levels of BPA (bisphenol A) and BADGE (bisphenol A diglycidyl ether) and derivatives exceeding the specific migration limits set in the European legislation. On the whole, low dietary exposure to migrants from can coatings has been reported. However, it is interesting to highlight that in these studies the combined exposure to multiple chemicals has not been considered.

Ultraviolet light printing inks are considered safer than the classical inks; however, despite being on the outer surface of the packaging material, their components can migrate into foodstuffs and can give rise to contamination. Photoinitiators are a part of the formulation of printing inks, being an important class of migrant, for which there have been more than 100 incidents of contamination of packaged food with photoinitiators reported through Rapid Alert System for Food and Feed (RASFF) alerts in the European Union. In this review the process of photo-polymerisation is explained in depth to provide an insight into the complexity of the process, and the diversity of potential contaminants together with their degradation products. The critical factors affecting the migration process itself are reviewed, together with analytical methods and the current legislation in the European Union and other parts of the world.