The trade-off between membrane permeability and selectivity and membrane fouling, including both physical and bio-fouling, are major challenges that limit the practical application of nanofiltration (NF) membranes. In order to address these issues simultaneously, multifunctional membranes with maximized water permeability/salt selectivity and enhanced antifouling and antibacterial properties are desired. In this work, we prepare a novel multifunctional thin film nanocomposite (TFN) NF membrane by embedding cellulose nanocrystal/silver (CNC/Ag) nanocomposites into a polyamide layer. The CNC/Ag TFN NF membranes exhibit excellent properties by taking advantage of both CNCs, a highly hydrophilic, low-cost, bio-renewable, and environmentally friendly nanomaterial, and Ag nanoparticles, one of the most effective bactericidal materials. With the incorporation of only 0.01 wt% CNC/Ag nanocomposites, a high pure water permeability (25.4 L m−2 h−1 bar−) and a high rejection rate of Na2SO4 (99.1%) of the CNC/Ag TFN NF membrane can be achieved, respectively. Besides, the membrane also exhibits exceptional antifouling (flux recovery ratio reaches 92.6% for humic acid) and antibacterial performance (99.4% reduction of Escherichia coli viability). Ag+ leaching tests also demonstrate the good stability of Ag nanoparticles in the active thin-film layer of the CNC/Ag NF membranes. These findings have strong positive implications for the development of next-generation high performance NF membranes for water treatment.
12 February 2020 in Environmental Science & Technology
Water scarcity has driven the demand for water production from unconventional sources and the reuse of industrial wastewater. Pressure-driven membranes, notably thin-film composite (TFC) membranes, stand as energy-efficient alternatives to the water scarcity challenge and various wastewater treatments. While pressure drives solvent movement, it concurrently triggers membrane compaction and flux deterioration. This necessitates a profound comprehension of the intricate interplay among compressive modulus, structural properties, and transport efficacy amid the compaction process. In this study, we present an all-encompassing compaction model for TFC membranes, applying authentic structural and mechanical variables, achieved by coupling viscoelasticity with Monte Carlo flux calculations based on the resistance-in-series model. Through validation against experimental data for multiple commercial membranes, we evaluated the influence of diverse physical parameters. We find that support polymers with a higher compressive modulus (lower compliance), supports with higher densities of "finger-like" pores, and "sponge-like" pores with optimum void fractions will be preferred to mitigate compaction. More importantly, we uncover a trade-off correlation between steady-state permeability and the modulus for identical support polymers displaying varying porosities. This model holds the potential as a valuable guide in shaping the design and optimization for further TFC applications and extending its utility to biological scaffolds and hydrogels with thin-film coatings in tissue engineering.