30 December 2021 in Environmental Science & Technology
15 February 2023 in Environmental Science & Technology
Ultrafiltration (UF) as one of the mainstream membrane-based technologies has been widely used in water and wastewater treatment. Increasing demand for clean and safe water requires the rational design of UF membranes with antifouling potential, while maintaining high water permeability and removal efficiency. This work employed a machine learning (ML) method to establish and understand the correlation of five membrane performance indices as well as three major performance-determining membrane properties with membrane fabrication conditions. The loading of additives, specifically nanomaterials (A_wt %), at loading amounts of >1.0 wt % was found to be the most significant feature affecting all of the membrane performance indices. The polymer content (P_wt %), molecular weight of the pore maker (M_Da), and pore maker content (M_wt %) also made considerable contributions to predicting membrane performance. Notably, M_Da was more important than M_wt % for predicting membrane performance. The feature analysis of ML models in terms of membrane properties (i.e., mean pore size, overall porosity, and contact angle) provided an unequivocal explanation of the effects of fabrication conditions on membrane performance. Our approach can provide practical aid in guiding the design of fit-for-purpose separation membranes through data-driven virtual experiments.
1 March 2021 in Journal of Hazardous Materials
20 February 2020 in Environmental Science: Nano
The trade-off between membrane permeability and selectivity and membrane fouling, including both physical and bio-fouling, are major challenges that limit the practical application of nanofiltration (NF) membranes. In order to address these issues simultaneously, multifunctional membranes with maximized water permeability/salt selectivity and enhanced antifouling and antibacterial properties are desired. In this work, we prepare a novel multifunctional thin film nanocomposite (TFN) NF membrane by embedding cellulose nanocrystal/silver (CNC/Ag) nanocomposites into a polyamide layer. The CNC/Ag TFN NF membranes exhibit excellent properties by taking advantage of both CNCs, a highly hydrophilic, low-cost, bio-renewable, and environmentally friendly nanomaterial, and Ag nanoparticles, one of the most effective bactericidal materials. With the incorporation of only 0.01 wt% CNC/Ag nanocomposites, a high pure water permeability (25.4 L m−2 h−1 bar−) and a high rejection rate of Na2SO4 (99.1%) of the CNC/Ag TFN NF membrane can be achieved, respectively. Besides, the membrane also exhibits exceptional antifouling (flux recovery ratio reaches 92.6% for humic acid) and antibacterial performance (99.4% reduction of Escherichia coli viability). Ag+ leaching tests also demonstrate the good stability of Ag nanoparticles in the active thin-film layer of the CNC/Ag NF membranes. These findings have strong positive implications for the development of next-generation high performance NF membranes for water treatment.
19 March 2021 in ACS Applied Materials & Interfaces
12 February 2020 in Environmental Science & Technology