The introduction of a mechanical harvesting process for oranges can contribute to enhancing farm profitability and reducing labour dependency. The objective of this work is to determine the spread of the vibration in citrus tree canopies to establish recommendations to reach high values of fruit detachment efficiency and eliminate the need for subsequent hand-harvesting processes. Field tests were carried out with a lateral tractor-drawn canopy shaker on four commercial plots of sweet oranges. Canopy vibration during the harvesting process was measured with a set of triaxial accelerometer sensors with a datalogger placed on 90 bearing branches. Monitoring of the vibration process, fruit production, and branch properties were analysed. The improvement of fruit detachment efficiency was possible if both the hedge tree and the machinery were mutually adjusted. The hedge should be trained to facilitate access of the rods and to encourage external fructification since the internal canopy branches showed 43% of the acceleration vibration level of the external branches. The machine should be adjusted to vibrate the branches at a vibration time of at least 5.8 s, after the interaction of the rod with the branch, together with a root mean square acceleration value of 23.9 m/s² to a complete process of fruit detachment.

The olive tree is an important crop in Portugal, where different levels of intensification coexist. The traditional olive orchards present profitability problems, mainly due to harvesting, so there has been a drastic reconversion towards high-density or super-high-density olive orchards. The latter present major constraints due to very specific needs for their use, being practically destined for new orchards. Consequently, the possibility of using systems based on canopy shakers in high-density olive orchards with local varieties is promising. The objective of this work is to evaluate a prototype canopy shaker for the harvesting of high-density olive orchards of the Portuguese variety ‘Cobrançosa’. The evaluation is based on the study of canopy shaking in order to adapt canopy training and the adaptability of the machine. For this purpose, the vibration of 72 points of the tree canopy was recorded and a qualitative assessment of the harvest was carried out. Differences were found between the different zones according to the direction of the forward movement of the harvester and the distance to the trunk. These differences were associated with the values obtained for fruit detachment, and a greater quantity of fruit was harvested in the areas of the canopy in contact with the rods.