Nanocomposite materials containing graphene oxide have attracted tremendous interest as catalysts and adsorbents for water purification. In this study, mesoporous titanosilicate/reduced graphene oxide composite materials with different Ti contents were employed as adsorbents for removing bisphenol A (BPA) from water systems. The adsorptive interaction between BPA and adsorption sites on the composite materials was investigated by Fourier transform infrared (FT-IR) and Raman spectroscopy. Adsorption capacities of BPA at equilibrium, qe (mg/g), decreased with increasing Ti contents, proportional to the surface area of the composite materials. FT-IR observations for fresh and spent adsorbents indicated that BPA adsorbed onto the composite materials by the electrostatic interaction between OH functional groups contained in BPA and on the adsorbents. The electrostatic adsorption sites on the adsorbents were categorized into three hydroxyl groups: Si-OH, Ti-OH, and graphene-OH. In Raman spectra, the intensity ratios of D to G band were decreased after the adsorption of BPA, implying adsorptive interaction of benzene rings of BPA with the sp2 hybrid structure of the reduced graphene oxide.
As a reusable adsorbent to remove lead from water, a peptide-based magnetic adsorbent incorporating lead-binding peptide was constructed. First, a 7-mer lead-binding peptide (TNTLSNN) was covalently bonded onto the surface of a magnetic bead. Compared to the adsorption capacity of a bare magnetic bead (4.0 mg lead/g bead), the peptide-linked bead exhibited a capacity more than eight times higher than that of a bare bead (34.1 mg lead/g bead). The regenerated peptide bead, by desorbing the lead from the bead with EDTA, could be repeatedly used (tested over six cycles) for the following round of lead adsorption without any significant loss of adsorption capacity. The selective removal of lead in the presence of other interfering metals was demonstrated with the individual or the combinatory use of four metal ions, namely Pb(II), Ni(II), Co(II), and Cu(II), where the amount of adsorbed Pb(II) was remarkably higher than those of the other metal ions. The adsorption isotherm followed the Langmuir model well, with the maximum adsorption loading (qmax) of 70.4 mg lead/g bead.