Based on the two-dimensional linear wave theory, the effects of the front wall thickness and the bottom profile of an Oscillating Water Column (OWC) device on its efficiency were analyzed. Using the potential flow approach, the solution of the associated boundary value problem was obtained via the boundary element method (BEM). Numerical results for several physical parameters and configurations were obtained. The effects of the front wall thickness on the efficiency are discussed in detail, then, various configurations of the chamber bottom are presented. A wider efficiency band was obtained with a thinner front wall. In a real scenario having a thinner front wall means that such a structure could have less capacity to withstand the impact of storm waves. Applying the model for the case of the Mutriku Wave Energy Plant (MWEP), findings showed that the proposed bottom profiles alter the efficiency curve slightly; higher periods of the incoming water waves were found. This could increase the efficiency of the device in the long-wave regime. Finally, the numerical results were compared with those available in the literature, and were found to be in good agreement.
Most experimental research on land-fixed Oscillating Water Column (OWC) systems assume that the OWC-water wave interaction happens with waves that propagate normally towards the device. However, the angle of incidence of the waves can determine the performance of the OWC, in particular the wave period at which the device resonates. In this study, an experimental investigation to examine the interaction of regular, oblique, water waves with a land-fixed, thick-front wall OWC device in terms of its hydrodynamic performance is reported. A 1:20 Froude scale was used to replicate a single chamber of the Mutriku Wave Energy Plant (MWEP), and a series of tests were carried out in a spectral wave basin. The goal of this study is to look at how incident wave direction and device location affect the hydrodynamic performance of land-fixed OWC systems in regular wave conditions with varying wave heights. The hydraulic performance includes the assessment of the wave amplification factor, hydrodynamic efficiency, the non-dimensional air pressure inside the chamber and non-dimensional water pressures on the chamber walls. The findings show that, for the nearshore OWC device, the period at which resonance occurs decreases when the incident wave angle increases. For the corresponding wave angles, similar results were found for the onshore and nearshore OWC devices, with a slight frequency shift in the bandwidth of the hydrodynamic efficiency. Furthermore, it was found that when wave height increases, the hydrodynamic efficiency improves for both short and long wave periods, with the exception of the resonance period, where the trend is reversed. Finally, regardless of the location, an OWC device with a thick front wall performs well when interacting with intermediate and long-period waves.
15 March 2022 in Engineering Analysis with Boundary Elements
Although there are constant improvements in wave energy converter (WEC) technology, it is crucial to investigate site-specific sea conditions for optimal power absorption and efficiency. This study compares the efficiency of a floating buoy-type WEC device, with three differently shaped floats: a semi-sphere, a cylinder considered suitable for a location near Ensenada, on the Baja California peninsula, and a novel, rounded, semi-rectangular float. A statistical analysis of the wave climate of the last 42 years was performed to define the conditions to which the device is subjected. The WEC location was chosen for shallow waters, using a computational model that solves the modified mild slope equation. The hydrodynamic response of the three float designs was then analyzed in the frequency and time domains, using the software ANSYS AQWA 19.2, to assess the dynamics of the floating body, the forces exerted, and the power absorbed, as well as the suitability of the proposed power take-off (PTO) system. The findings show that the proposed float design absorbs the most energy, with an annual power of 135.11 MW, and that the PTO mechanism is appropriate.